FSB Mobo Setting with 1.2 GHz T-Bird

[Brangwen]

I'm running a 1.2 Ghz TB on a Iwill KK266 mobo. I purchased the chip from www.motherboards.com and was informed that my chip has a 200 FSB. I have 512 MB PC133 CS2 on my board as well as a NVidia GEForce (Creative) AGP card (32 MB DDR), a 30 GB ATA100 IBM HD, a Plextor CDRW and a 52X Creative CDROM.

The mobo is presently jumpered at 100 FSB. The other mobo jumper choice is 133 FSB. My Bios is Award 2000 release with SmartBios, I believe it's called. The DRAM clock is set at 100 according to POST screen. SisSoft Sandra presented me with the following:

Performance rating: PP1595
Multiplier: 12x
Class: 7x86mmx
Revision/Stepping: 4 / 2
Stepping Mask: A4

Caches:
Internal Cache: 64kB synchronous write-back (2-way, 64 byte line size)
Internal Data Cache: 64kB synchronous write-back (2-way, 64 byte line size)
L2 On-board Cache: 256kB ECC synchronous write-back (16-way, 64 byte line size)
L2 Cache Multiplier: 1/1x (equiv. 1199MHz)

I am not interested in oc'ing (necessarily) at this time. My question is in light of my 200 MHz FSB and PC133 SDRAM, what SHOULD my settings be to take advantage of the FSB and the PC133 SDRAM CS2?

Thx for your suggestions!

Brangwen

 

[xtreme2k]

9x133 is what you want to be using if you dont want to OC