Folding@Home: 24 hour stats - February 7, 2009

[GLeeM]

Folding@Home TeAm #198

Welcome to the TeAm, cactauz 🙂 If you have any questions or need any help, just ask.


The TeAm is in 19th place.

Join us in the drive for 18th place! While helping find cures for diseases!

Points
Total______ 231,455,293
24hr Avg______ 581,499
Last 24hr______ 606,488

Active Users _____ 203
Avg PPD_______ 2,864.5

Overtakes 😀
2CPU.com Folding@Home __ 3.8 months
PC Perspective FoldingFrogs_ 5.1 months
EOC Folding@Home Team _ 11.3 months
SAGoons ________________ 1.1 years

Threats 🙁
folding@evga _____________ 1.4 months
Pande Lab________________ 1.0 years
Folding@SweClockers.com __ 1.1 years
Team FTL ________________ 1.1 years


Milestone Makers since last post :thumbsup: (from this list)

mgpaulus ___________ 2,500,000
gandrews35 ___________ 100,000
jkudelka-ps3 ___________ 50,000
Shebnay ______________ 50,000
ChemC _______________ 10,000
Outgas _______________ 10,000
JZavala _______________ 5,000
cactauz _______________ 1,000
pm ___________________ 1,000
Daeldus _______________ 1,000


Top 30 Producers

__ Points in last 7 days
1 __ 671,592 ___ MarkF_Williams
2 __ 600,388 ___ Gravity
3 __ 188,030 ___ Drsignguy
4 __ 162,306 ___ Insidious
5 __ 145,421 ___ Arlen
6 __ 128,456 ___ mike9o
7 __ 123,866 ___ Sniderhouse
8 __ 119,504 ___ PokeyTA
9 ___ 82,529 ___ Silverthorne
10 __ 77,900 ___ anntonhtpc
11 __ 73,347 ___ Athlex
12 __ 61,916 ___ jonesthewine
13 __ 54,205 ___ lightstardj
14 __ 54,109 ___ TurtleBlue
15 __ 51,680 ___ legoman666
16 __ 48,298 ___ RTThurman
17 __ 45,104 ___ biodoc
18 __ 43,804 ___ Cutthroat
19 __ 41,198 ___ Foxery
20 __ 38,968 ___ mdoogie169
21 __ 37,624 ___ PeteTheCat
22 __ 36,257 ___ Baluba
23 __ 35,972 ___ Shebnay
24 __ 34,954 ___ shallok
25 __ 34,158 ___ Dranzerk
26 __ 33,931 ___ vigneron
27 __ 33,254 ___ StefanLenz
28 __ 32,600 ___ TomPhilippart
29 __ 30,237 ___ LetsGoPreds
30 __ 29,810 ___ mgpaulus


These 137 sent results in the last 24 hours:

____TeAm Rank__Points_____Name
... 1 ______ 2 __ 102,484 ___ MarkF_Williams :shocked: :thumbsup:
... 2 ______ 1 __ 84,920 ___ Gravity
... 3 _____ 24 __ 35,649 ___ Drsignguy
... 4 ______ 3 __ 23,177 ___ Insidious
... 5 ______ 8 __ 21,090 ___ Arlen
... 6 ______ 4 __ 17,708 ___ Sniderhouse
... 7 ______ 7 __ 16,085 ___ mike9o
... 8 _____ 15 __ 14,289 ___ PokeyTA
... 9 _____ 63 __ 11,678 ___ Silverthorne
. 10 _____ 12 __ 10,563 ___ lightstardj
. 11 ______ 6 __ 10,554 ___ anntonhtpc
. 12 ____ 378 __ 10,472 ___ Shebnay
. 13 ______ 5 ___ 9,792 ___ Athlex
. 14 ______ 9 ___ 8,428 ___ jonesthewine
. 15 ____ 124 ___ 8,296 ___ PatrickHorner
. 16 _____ 17 ___ 7,493 ___ TurtleBlue
. 17 _____ 43 ___ 7,296 ___ Baluba
. 18 _____ 26 ___ 6,575 ___ legoman666
. 19 _____ 22 ___ 6,283 ___ Cutthroat
. 20 _____ 81 ___ 6,125 ___ kart17wins
. 21 _____ 99 ___ 5,944 ___ RTThurman
. 22 ____ 204 ___ 5,757 ___ dmo
. 23 _____ 46 ___ 5,726 ___ PeteTheCat
. 24 _____ 11 ___ 5,537 ___ biodoc
. 25 _____ 75 ___ 5,531 ___ TomPhilippart
. 26 _____ 28 ___ 5,315 ___ Foxery
. 27 _____ 60 ___ 5,258 ___ shallok
. 28 _____ 54 ___ 5,178 ___ Dranzerk
. 29 _____ 13 ___ 4,964 ___ GLeeM
. 30 _____ 64 ___ 4,906 ___ StefanLenz
. 31 _____ 57 ___ 4,546 ___ LetsGoPreds
. 32 _____ 32 ___ 4,510 ___ mdoogie169
. 33 _____ 20 ___ 3,905 ___ mgpaulus
. 34 _____ 67 ___ 3,840 ___ alfa147x
. 35 _____ 14 ___ 3,805 ___ HurricaneAndrew
. 36 _____ 62 ___ 3,392 ___ Desslok
. 37 _____ 36 ___ 3,384 ___ dawks-rawks
. 38 _____ 71 ___ 3,007 ___ Schadenfroh
. 39 ____ 104 ___ 2,976 ___ anield
. 40 _____ 73 ___ 2,787 ___ ShawnD1
. 41 ____ 717 ___ 2,722 ___ Outgas
. 42 ____ 125 ___ 2,715 ___ zacharygthomas
. 43 ____ 209 ___ 2,703 ___ theAnimal
. 44 ____ 143 ___ 2,609 ___ [TA]Assimilator1
. 45 ____ 709 ___ 2,539 ___ ChemC
. 46 _____ 70 ___ 2,435 ___ HappyCracker
. 47 _____ 38 ___ 2,397 ___ vigneron
. 48 _____ 48 ___ 2,288 ___ KingSalami
. 49 _____ 35 ___ 2,272 ___ Neurodog
. 50 _____ 44 ___ 2,239 ___ m1ldslide1
. 51 _____ 59 ___ 2,239 ___ Sparks
. 52 ____ 551 ___ 2,174 ___ Denithor
. 53 ____ 109 ___ 2,061 ___ Brazos
. 54 _____ 31 ___ 2,035 ___ DavidBoaz
. 55 _____ 27 ___ 1,936 ___ xbassman
. 56 ____ 118 ___ 1,844 ___ Creig
. 57 _____ 82 ___ 1,810 ___ SilverSurfer042677
. 58 ____ 212 ___ 1,790 ___ Grnstang93
. 59 _____ 21 ___ 1,760 ___ o080o
. 60 ____ 315 ___ 1,760 ___ ScottFarland
. 61 ____ 114 ___ 1,689 ___ clicq
. 62 _____ 47 ___ 1,688 ___ fhonyotski
. 63 _____ 80 ___ 1,558 ___ deninc66
. 64 ____ 475 ___ 1,533 ___ a5ehren
. 65 ____ 355 ___ 1,504 ___ BiggerHammer
. 66 ____ 130 ___ 1,460 ___ DustinD
. 67 _____ 52 ___ 1,431 ___ JoshLiechty
. 68 ____ 297 ___ 1,375 ___ AndersSwede
. 69 ____ 138 ___ 1,198 ___ snowdogg187
. 70 ____ 123 ___ 1,172 ___ dmens
. 71 _____ 87 ___ 1,095 ___ TAS-petrusbroder
. 72 ____ 226 ___ 1,089 ___ mnelsonx
. 73 _____ 61 ___ 1,083 ___ Zensal
. 74 ____ 179 ___ 1,072 ___ pad1136
. 75 ___ 1,226 ___ 1,059 ___ cactauz
. 76 ____ 113 ___ 1,045 ___ Deyer
. 77 _____ 69 ___ 1,022 ___ Esquire
. 78 _____ 95 ___ 1,022 ___ Antero
. 79 ____ 240 ____ 935 ___ Garfield3d
. 80 _____ 53 ____ 919 ___ stevty2889
. 81 ____ 351 ____ 907 ___ ho1ysword
. 82 ____ 242 ____ 905 ___ DerekWilson
. 83 ____ 274 ____ 905 ___ Jinson
. 84 ____ 288 ____ 905 ___ gandrews35
. 85 ____ 316 ____ 905 ___ fhqwgads2005
. 86 ____ 257 ____ 900 ___ tomiko
. 87 ____ 232 ____ 838 ___ robor007
. 88 ____ 187 ____ 802 ___ DennyLam
. 89 ____ 128 ____ 768 ___ PunjabiPlaya
. 90 ____ 120 ____ 755 ___ abel007
. 91 ___ 1,140 ____ 755 ___ Daeldus
. 92 _____ 90 ____ 750 ___ ViperGTS
. 93 ____ 391 ____ 750 ___ jkudelka-ps3
. 94 ____ 751 ____ 749 ___ Turin39789
. 95 _____ 79 ____ 746 ___ MasterChef
. 96 ___ 1,086 ____ 695 ___ CGMARTIN
. 97 ____ 205 ____ 682 ___ YoEddy
. 98 ____ 536 ____ 682 ___ bbzzdd
. 99 _____ 74 ____ 675 ___ Lnx227
100 ____ 694 ____ 665 ___ deerslayer(TeAmAnandtech)
101 ____ 147 ____ 626 ___ Imzjustplayin
102 ____ 167 ____ 511 ___ jswjimmy
103 ____ 345 ____ 455 ___ TA_andy
104 _____ 92 ____ 450 ___ kravahn
105 _____ 96 ____ 450 ___ ChrisHuff
106 ____ 131 ____ 450 ___ zerocool1
107 ____ 171 ____ 450 ___ superHARD
108 ____ 380 ____ 450 ___ Andy
109 ____ 405 ____ 450 ___ Drinken
110 ____ 429 ____ 450 ___ ecvs85
111 ____ 629 ____ 450 ___ lookouthere
112 ____ 170 ____ 442 ___ mchan1
113 ____ 256 ____ 440 ___ Mike5008
114 ____ 367 ____ 401 ___ Shoobie
115 ____ 397 ____ 401 ___ Slocketman
116 ____ 902 ____ 401 ___ rise
117 ___ 1,231 ____ 401 ___ pm
118 ____ 960 ____ 384 ___ StanleyIndevar
119 ____ 151 ____ 354 ___ JetBlack69
120 ____ 321 ____ 353 ___ SickBeast
121 _____ 29 ____ 225 ___ MartinTrevino
122 _____ 58 ____ 225 ___ amdborg
123 ____ 196 ____ 225 ___ PeeSee
124 ____ 292 ____ 225 ___ Icondog
125 ____ 304 ____ 225 ___ Memnoch
126 ____ 327 ____ 225 ___ Titansfury
127 ____ 439 ____ 225 ___ PhillipDoede
128 ____ 693 ____ 225 ___ Gestahl
129 ____ 827 ____ 225 ___ Plantatree
130 ____ 173 ____ 217 ___ seanc85
131 ____ 797 ____ 213 ___ google101948331676086
132 _____ 97 ____ 186 ___ COPOHawk
133 ____ 152 ____ 186 ___ jtmiller
134 ____ 415 ____ 186 ___ dlhuang
135 ____ 107 ____ 176 ___ JHutch2000
136 ____ 759 ____ 168 ___ liviathan
137 ____ 286 ____ 119 ___ McSilence


Todays Climbers

Steps__Name
147 __ Daeldus
147 __ cactauz
106 __ CGMARTIN
97 ___ pm
64 ___ Outgas
53 ___ ChemC
30 ___ Shebnay
28 ___ Denithor
28 ___ Turin39789
25 ___ Stanley_Indevar
19 ___ rise
15 ___ a5ehren
14 ___ deerslayer_(TeAm_Anandtech)
7 ____ BiggerHammer
6 ____ Gestahl
6 ____ google101948331676086
6 ____ Plantatree
5 ____ AndersSwede
4 ____ dmo
3 ____ Patrick_Horner
3 ____ gandrews35
3 ____ Slocketman
3 ____ bbzzdd
3 ____ lookouthere
2 ____ Baluba
2 ____ RTThurman
2 ____ theAnimal
2 ____ Grnstang93
2 ____ robor007
2 ____ Phillip_Doede
2 ____ liviathan
1 ____ PeteTheCat
1 ____ Dranzerk
1 ____ LetsGoPreds
1 ____ shallok
1 ____ Silverthorne
1 ____ TAS-petrusbroder
1 ____ kravahn
1 ____ Creig
1 ____ zerocool1
1 ____ jswjimmy
1 ____ PeeSee
1 ____ mnelsonx
1 ____ Garfield3d
1 ____ ScottFarland
1 ____ ecvs85

Sorry about any slight name differences. Or errors.

Thanks to all who contributed - big and small 😀
And thanks to those who are crunching a WU and will be on the list soon 😉

Folding@Home TeAm #198

Insidious's guide to set up two SMP clients on quad

Insidious's guide to set up static IP address to keep SMP client from stalling.

MDE's setup guide.

EOC stats

F@H Stats

 

[theAnimal]

Thanks GLeeM! 🙂

Congrats to the MMs and welcome to cactauz! 😀

 

[jonesthewine]

Originally posted by: theAnimal
Thanks GLeeM! 🙂

Congrats to the MMs and welcome to cactauz! 😀

seconded

 

[Pokey]

Welcome to Folding cactauz 😀

Congratulations to the MM's . 😎

Thanks for the stats GLeeM . :thumbsup:


GLeeM: YHPM

 

[Drsignguy]

Thanks GLeeM for the stats, much appreciated! 🙂

Welcome cactauz to the team. 🙂

Congrats to all the MM's and to mgpaulus on achieving 2.5M. Well done! :thumbsup:

Nice work everyone. Looks like our point production is on a steady incline. 🙂

j

 

[petrusbroder]

Originally posted by: jonesthewine

Originally posted by: theAnimal
Thanks GLeeM! 🙂

Congrats to the MMs and welcome to cactauz! 😀

seconded

Thirded ... 😉

 

[Stump1000]

How can I join this team? I didn't enter a team at all so far.

 

[ICXRa]

Originally posted by: Stump1000
How can I join this team? I didn't enter a team at all so far.

Enter team 198 while you are configuring the F@H client and your in. Look forward to having you aboard the TeAm.

Welcome cactauz and a big congrats to our milestone makers!

Thanks GLeeM for your continued efforts keeping us all up to date on our stats!

:thumbsup:

 

[Pokey]

Quick question for the TeAm:
I am using Fahmon to monitor my hardware and I have noticed a disparity between what Fahmon calculates and what actually gets credited on the stats sites. I have Fahmon preferences set to calculate based on "all frames" which I assume would be the most conservative approach. Without putting too fine a point on it, Fahmon most often calculates high by as much as 33 per cent.
Has anyone had this experience and does anyone have an answer for it?

 

[dajeepster]

well... I think I just joined the team for folding... I wanted to start fold with the few ATI gpu that I have until they get a gpu client for seti.

Do I need to keep the GPU display open when crunching?... I notice that when I close the window, my gpu utilization goes to zero. I'm assuming I need to shut off the screensaver and set the power saving setting to off.

how long does it take for results... on one computer i'm gpu crunching on is a radeon 3650, and i have 8 threads running for seti on the cpu (i7)... so... with this informarion, how long do you think it will take for results?

my name is :dajeepster
and i joined team: 198
i've only down loaded and run the client from fold@home.

 

[GLeeM]

Originally posted by: dajeepster
well... I think I just joined the team for folding... I wanted to start fold with the few ATI gpu that I have until they get a gpu client for seti.

Do I need to keep the GPU display open when crunching?... I notice that when I close the window, my gpu utilization goes to zero. I'm assuming I need to shut off the screensaver and set the power saving setting to off.

how long does it take for results... on one computer i'm gpu crunching on is a radeon 3650, and i have 8 threads running for seti on the cpu (i7)... so... with this informarion, how long do you think it will take for results?

my name is :dajeepster
and i joined team: 198
i've only down loaded and run the client from fold@home.

Not an expert on GPU client, but until an expert does give solutions:

Normally it is best to NOT have the GPU display open. It is curious that utilization goes to zero.
You may need to set the GPU client to a higher priority for it to get enough CPU cycles from the Seti client. There is a setting during configuration for a little higher priority or there is on most clients anyhow.

 

[Drsignguy]

Originally posted by: Pokey
Quick question for the TeAm:
I am using Fahmon to monitor my hardware and I have noticed a disparity between what Fahmon calculates and what actually gets credited on the stats sites. I have Fahmon preferences set to calculate based on "all frames" which I assume would be the most conservative approach. Without putting too fine a point on it, Fahmon most often calculates high by as much as 33 per cent.
Has anyone had this experience and does anyone have an answer for it?

From what I have found is that Fahmon calculates PPD from the current client that is working. So, If all clients have low points, it is calculated at a higher PPD production. Bottom line, it only calculates at the current client only. At the end of the day, the average is what each client has finished and added up to an average by each web site depending on the timezone.

 

[VirtualLarry]

Originally posted by: dajeepster
well... I think I just joined the team for folding... I wanted to start fold with the few ATI gpu that I have until they get a gpu client for seti.

Do I need to keep the GPU display open when crunching?... I notice that when I close the window, my gpu utilization goes to zero. I'm assuming I need to shut off the screensaver and set the power saving setting to off.

how long does it take for results... on one computer i'm gpu crunching on is a radeon 3650, and i have 8 threads running for seti on the cpu (i7)... so... with this informarion, how long do you think it will take for results?

my name is :dajeepster
and i joined team: 198
i've only down loaded and run the client from fold@home.

Under what OS? I think with an ATI card, you need to keep one CPU thread free to manage the GPU, otherwise your GPU PPD will be abysmal. Configure the GPU client for slightly higher priority too.

 

[dajeepster]

Originally posted by: GLeeM

Originally posted by: dajeepster
well... I think I just joined the team for folding... I wanted to start fold with the few ATI gpu that I have until they get a gpu client for seti.

Do I need to keep the GPU display open when crunching?... I notice that when I close the window, my gpu utilization goes to zero. I'm assuming I need to shut off the screensaver and set the power saving setting to off.

how long does it take for results... on one computer i'm gpu crunching on is a radeon 3650, and i have 8 threads running for seti on the cpu (i7)... so... with this informarion, how long do you think it will take for results?

my name is :dajeepster
and i joined team: 198
i've only down loaded and run the client from fold@home.

Not an expert on GPU client, but until an expert does give solutions:

Normally it is best to NOT have the GPU display open. It is curious that utilization goes to zero.
You may need to set the GPU client to a higher priority for it to get enough CPU cycles from the Seti client. There is a setting during configuration for a little higher priority or there is on most clients anyhow.

shut the GPU display off, the higher priority was already set.. oh.. and i'm running vista64.
utilization is still zero... been monitoring it with GPU-Z... I'll check back on it in a few hours... have to get some sleep before work tonight.

 

[dajeepster]

Originally posted by: VirtualLarry

Originally posted by: dajeepster
well... I think I just joined the team for folding... I wanted to start fold with the few ATI gpu that I have until they get a gpu client for seti.

Do I need to keep the GPU display open when crunching?... I notice that when I close the window, my gpu utilization goes to zero. I'm assuming I need to shut off the screensaver and set the power saving setting to off.

how long does it take for results... on one computer i'm gpu crunching on is a radeon 3650, and i have 8 threads running for seti on the cpu (i7)... so... with this informarion, how long do you think it will take for results?

my name is :dajeepster
and i joined team: 198
i've only down loaded and run the client from fold@home.

Under what OS? I think with an ATI card, you need to keep one CPU thread free to manage the GPU, otherwise your GPU PPD will be abysmal. Configure the GPU client for slightly higher priority too.

I'm running Vista Ultimate 64. Boinc client is 6.4.5.

I have two machines... one is as stated.

the other is a PhenomII940 set at 100%processor, and 95%cpu time... four threads of seti are running, and one gpu client of f@h is running. This computer started running fine when I changed from 100 to 95%cpu time.

the i7, is now at %90of of processors , and 95% cpu time. only 7 threads are running in seti now... and still no gpu client running.

 

[Pokey]

Thanks Drsignguy. I have used Fahmon for some time now and never noticed this until I started using the GPUs for folding back during the Dec race. The GPUs are so fast, I guess they skew the calc.s to some extent. I think it has been almost a year since Fahmon has been updated.


dajeepster I may not understand the question but if you are running the console client you the window has to stay open. You can minimize it but not close it. That shuts down the client. Most people recommend the sys tray client.
Also I read some where that you should not run a screen saver of any sort as it uses too much resources and will really slow down your client.

 

[Markfw]

Originally posted by: Drsignguy

Originally posted by: Pokey
Quick question for the TeAm:
I am using Fahmon to monitor my hardware and I have noticed a disparity between what Fahmon calculates and what actually gets credited on the stats sites. I have Fahmon preferences set to calculate based on "all frames" which I assume would be the most conservative approach. Without putting too fine a point on it, Fahmon most often calculates high by as much as 33 per cent.
Has anyone had this experience and does anyone have an answer for it?

From what I have found is that Fahmon calculates PPD from the current client that is working. So, If all clients have low points, it is calculated at a higher PPD production. Bottom line, it only calculates at the current client only. At the end of the day, the average is what each client has finished and added up to an average by each web site depending on the timezone.

Mine fluctuates from 105k to 116k ppd. I never seem to get closer than 95% of the low number, so I think there is a slight calc problem. It should be about what the average number I see is.

And I have tried every version, and they all abend many time a day. I wish an updated version was available.

 

[Drsignguy]

I am sure there is a calculation problems, but I don't think it's with Fahmon. Depends on the rig and what it is doing. As an example, if you have a rig that has 2 gpu and 1 smp, the PPD production at its peak will diminish if you use it like surfing the web or e-mails. Antivirus or any other background program will also apply. If you then leave it alone for a while, it will go back up in production but will still fluctuate. So no matter what, each rig will have some discrepancies. Every machine has something working behind the scenes and will hinder the PPD in some way or another. It is like each PC has a personality, just like we do.

I just figure my PPD will be approx 5-10% lower than my maximum Fahmon monitors.

 

[GLeeM]

Originally posted by: Pokey
dajeepster I may not understand the question but if you are running the console client you the window has to stay open. You can minimize it but not close it. That shuts down the client. Most people recommend the sys tray client.
Also I read some where that you should not run a screen saver of any sort as it uses too much resources and will really slow down your client.

Doh!

Sorry dajeepster, I misunderstood. I'll bet Pokey is right. The DOS looking window needs to stay alive. I thought you meant the protien display that shows graphically a pretty picture/video.

 

[dajeepster]

thanks Pokey, VirtualLarry, and GLeeM for your help.

I forgot to try the oldest, tried and true method in the book... reboot :shocked:

Everything appears to be working as long as...
-I rebooted the machine
-I don't open the protien display (you were correct on that assumption GLeeM... it seems that when i open the display, my drivers get corrupted.. i'm running catalyst 9.1.. but if I don't open the display...my gpu is being utilized.. according to gpu-z) and it's such a pretty picture too... i get mesmerized by it.

the i7 is actually running Server2008 64bit.

Pokey- I'm running the sys tray client... the catalyst drivers come with a link now when download the latest drivers... works on all ati 2xxx and above cards. too bad they couldn't get the 19xx and below cards to work .. i've got a few of those :frown:

also... does anyone have any tips and tricks for running headless units?.. ie... do I need to keep a load on the cards? Can i remote desktop into them and still have them work or do I need to access each locally?

 

[Markfw]

Originally posted by: Drsignguy
I am sure there is a calculation problems, but I don't think it's with Fahmon. Depends on the rig and what it is doing. As an example, if you have a rig that has 2 gpu and 1 smp, the PPD production at its peak will diminish if you use it like surfing the web or e-mails. Antivirus or any other background program will also apply. If you then leave it alone for a while, it will go back up in production but will still fluctuate. So no matter what, each rig will have some discrepancies. Every machine has something working behind the scenes and will hinder the PPD in some way or another. It is like each PC has a personality, just like we do.

I just figure my PPD will be approx 5-10% lower than my maximum Fahmon monitors.

Well, I think mine abends, since its not designed to do this with all my boxes at home (11 of them)

36 clients. Click me

 

[Drsignguy]

Originally posted by: dajeepster
thanks Pokey, VirtualLarry, and GLeeM for your help.

I forgot to try the oldest, tried and true method in the book... reboot :shocked:

Everything appears to be working as long as...
-I rebooted the machine
-I don't open the protien display (you were correct on that assumption GLeeM... it seems that when i open the display, my drivers get corrupted.. i'm running catalyst 9.1.. but if I don't open the display...my gpu is being utilized.. according to gpu-z) and it's such a pretty picture too... i get mesmerized by it.

the i7 is actually running Server2008 64bit.

Pokey- I'm running the sys tray client... the catalyst drivers come with a link now when download the latest drivers... works on all ati 2xxx and above cards. too bad they couldn't get the 19xx and below cards to work .. i've got a few of those :frown:

also... does anyone have any tips and tricks for running headless units?.. ie... do I need to keep a load on the cards? Can i remote desktop into them and still have them work or do I need to access each locally?

I read at the Folding@ Home website that the Protien display has known issues and shoulden't be opened anyway. Mine gave me problems also. If opened and you get it to open, it slows the client way down..