First overclocking experience - need advice and some instructions...

[Barefoot]

Alright. I've used an OC'ed machine before, but this is my first time ever doing it myself. Here's the hardware I am using: AMD Duron 600, unlocked and previously tested over 1GHz stably, GlobalWin FOP38, and a PC Chips M807 board with the KT133 chipset. No matter what you think about PC Chips, do not post your opinion on it here - create your own thread, I don't care to hear about it. The board supports many FSB speeds, but I don't know how to set it to run faster than the 600MHz. I've already tested it, and it runs fine at 600. It uses an Award BIOS, so if there's a flash somewhere I can use to make it obvious how to overclock, I could sure use a link. Y'all just let me know what I need to know. Thanks a lot!

- Barefoot

 

[hellboy]

hope this helps you
tweak3d cpu guide

 

[hellboy]

here is another one as well
Tom's Guide


good luck 🙂

hellboy

 

[Barefoot]

Thanks for the help 🙂 Checkin' em out...

 

[johncar]

Barefoot,
Go here if you want to "understand" what's going on in the oc'g process http://members.nbci.com/candjac/index.htm Duron/Tbird OC article.
John C.