Finally got around to O/C'g my E6300

[Loop2kil]

Haven't tried any higher yet...gonna let this one sit a day or so.
Had to set my vcore to 1.4v in bios to get it to show 1.32v
Temps still worry me a bit...I just dont like things that hot....I don't think Zalman's were designed for O/C'g.

A couple of questions:
What is default PCI express frequency? I set mine at 90
What is FSB termination voltage?

my rig:
P5B-E
6300E with Zalman 9500
2 x 1 gb Crucial Ballistix
Asus 7950 GT
Ultra 600w PSU

http://members.speedguide.net/loop2kil/oc.jpg

 

[Chunkee]

ZOWIE....very nice...

way cool

now if i can learn how to get my new opteron going..i will be set

 

[Conky]

Default PCI express frequency is 100. You should definitely set it to this. (higher can damage your videocard)

Not sure on the FSB termination voltage... I don't mess with that myself.

That temp in the screenshot isn't bad as a max but if you are idling at that temp you ought to figure out a way to cool it down.

 

[Loop2kil]

Originally posted by: Beachboy
Default PCI express frequency is 100. You should definitely set it to this. (higher can damage your videocard)

Not sure on the FSB termination voltage... I don't mess with that myself.

That temp in the screenshot isn't bad as a max but if you are idling at that temp you ought to figure out a way to cool it down.

that's running 2 instances of Folding, so i would say full load.
I will adjust the pci-express to 100 as well, thanks for the heads up.