ever ruin a cpu/ram/mobo just by upping the fsb?

[xSauronx]

simple as that
im doing 190fsb on my epox 8k5a2+ with some hynix/spectek pc2100 and a 1700+ tbred a (1.6v)

figured its not likely to ruin anything if i go a little higher, i wont add any voltage since i cant afford to replace anything...but i didnt want to run the fsb too high at some point and lose something. anyone ever have that problem?

thanks

 

[Corporate Thug]

nope, losing a processor due to voltage/heat. not by upping FSB

 

[pspada]

You might just want to keep an eye on the CPU temp, if it gets too high it can kill the CPU.

 

[NEWKILLA]

hey bro,,

i just put together the same combo,

1-8k5a2+

1-sweet 1700@2170

1-256 kingston value running @180

the only probs i encountered was i didn t burn it in long enough

and i had some file corruption, i just cleared the cmos

and inched it up slowly, im using a coolermaster adjustable fan

and it runs cool as a cucumber and pretty quiet too,

does any body know if the agp/pci divivder on this board

is automatic or manual

KILLLLLAAAAA

 

[Texter]

I once flashed a new BIOS on my overly expensive Asus A7-V motherboard. Put the FSB on 200 instead of 100...fried like a potatoe...boy did my head turn red then...everything else however miraculously survived...only the board fried...it's hanging on the wall next to this desk hehe...