epox 8k3a questions

[hydro1234]

I'm having problems setting up the ide led indicator and power led indicator. The manual shows that the power led has 4 pins but the connector for it only covers 2, I'm not sure why I can't get the other one to work. My other question is about the host clock speed. The default is 100mhz, is it safe to set it at 133 mhz? any help is much aprecciated.

 

[wasnlos]

what cpu ??? the cpu defines the clock.

 

[Loggitt]

If your led's aren't working at all it's because they're connected backwards. For the uninitiated, led means Light Emitting Diode and a diode only allows current to flow in one direction. Try reversing their connections. You set the jumper on the main board for 133mhz bus speed only if you have an XP processor, I believe. Surely, though, the processor you have has to support it or it won't work with that setting.

Epox 8K3A, XP1800+ @ 1,690, 146/292, Corsair PC2700 at 180/360. Cranks!!

Haven't been brave enough yet to attempt an unlock of the cpu!

 

[hydro1234]

I already tried reversing them. My case is kind of weird I should of mentioned it in the first post. It has 2 sets of connctors normal ones and ones that only cover 1 pin and say either +5v or D on them. I think it has something to do with those but I can't figure it out.