Enlight 7237 and Socket 11 Question

Moonbeam

Elite Member
Nov 24, 1999
74,468
6,693
126
I built a system with the Addtronics 3890 A, a nice case I thought, but when I installed a generic Socket 11, the socket would hit the power supply. By using an Iwill socket, there was enough difference to just squeeze the door shut. I want to build another similar system, but don't want to run into this fit problem again. Does anybody have experience with the Enlight 7237 and socket converteres, or can suggest an inexpensive case that has lost of room for a converter? Thanks for any help.
 

Jhhnn

IN MEMORIAM
Nov 11, 1999
62,365
14,685
136
I believe you are referring to a slocket or slotket adapter for fitting s370 processors to slot1 motherboards. If that is the situation, then yes, the Enlight 7237 would be a good choice, as the psu is mounted above the motherboard, completely out of the way.
 

Moonbeam

Elite Member
Nov 24, 1999
74,468
6,693
126
Thanks for the info, Jhhnn. I was indeed refering to the slot one to 370 converter. I've been trying to figure out an adequate and inexpensive case to build a basic system in that I can use to play around with installing different OSes etc, without having to worry about it crashing or needing it for other stuff.