• We’re currently investigating an issue related to the forum theme and styling that is impacting page layout and visual formatting. The problem has been identified, and we are actively working on a resolution. There is no impact to user data or functionality, this is strictly a front-end display issue. We’ll post an update once the fix has been deployed. Thanks for your patience while we get this sorted.

(EDITED) - Vizio M550SV > Vertical color lines edge to edge...

pede69

Junior Member
Little help please...


1.5 year old Vizio 55" M550SV now has color vertical lines edge to edge.

Audio ok.

Images here: http://jaxehost.com/vizio/

Likely cause?

Happened after first cold night. Worked ok first 10 mins, then problem started.


Thank you in advance for your help and guidance.

John
 
Last edited:
BTW...

You do realize that this is an LED screen, not an LCD, right?

Would that make a difference?

no, the screen is LCD. The backlight is LED. Well, it's side lit so I am not even sure it should be called backlight anymore. That looks like problem with the horizontal control board.
 
Last edited:
Thanks...

This TV has two visible boards. The main board and the power supply board.

Where would the horizontal control board be located?


BTW... the TV would always take about 7-9 seconds to see ANYTHING come up on the screen. Now with the problem, you see the color lines within 1.5 to 2 seconds. Does that mean anything?

PS - Here are a few picture that may help:
http://jaxehost.com/vizio/

Thanks for your help,
John
 
Thanks...

This TV has two visible boards. The main board and the power supply board.

Where would the horizontal control board be located?


BTW... the TV would always take about 7-9 seconds to see ANYTHING come up on the screen. Now with the problem, you see the color lines within 1.5 to 2 seconds. Does that mean anything?

PS - Here are a few picture that may help:
http://jaxehost.com/vizio/

Thanks for your help,
John

probably the main board then. see if you can find someone selling the same tv with the broken panel and just swap out the board. assuming of course the other tv only has the broken panel or backlight. Definitely looks like the horizontal signal portion is messed up.

have you tried re-seating all the cables again? Taking care to let the capacitors drain before you touch anything.
 
Back
Top