ECS K7SEM V3.0C with Onboard AMD D1200+ CPU and Heatsink/Fan $89 at Krex

Toggle sidebar Toggle sidebar
E

esun

Platinum Member
Nov 12, 2001
2,214
0
0
For $89 you could get an ECS K7S5A and a 1.2 GHz Duron (though no heatsink, but c'mon, another $15 big deal) combo from Fry's (if you happen to live near one). That motherboard looks terrible, and what the heck? Onboard processor? Mean you can't upgrade or what? And what is 1200+? 1.2 GHz or is 1.2 another "rated" speed?
 
T

tk149

Diamond Member
Apr 3, 2002
7,253
1
0
Originally posted by: esun
For $89 you could get an ECS K7S5A and a 1.2 GHz Duron (though no heatsink, but c'mon, another $15 big deal) combo from Fry's (if you happen to live near one). That motherboard looks terrible, and what the heck? Onboard processor? Mean you can't upgrade or what? And what is 1200+? 1.2 GHz or is 1.2 another "rated" speed?
Click to expand...

Did you actually read the description? This mobo has onboard video (in addition to an AGP slot). The K7S5A does not. This mobo is micro-ATX. The K7S5A is ATX. This mobo is obviously targeted at budget buyers who aren't looking for a high-end system. Official product link

Think before you post (but thanks for the bump:)).

If you have any questions about this product, you should ask the seller (Krex).

Oh Man, when did I become a Senior Member?

:Q:eek:
 
U

Utterman

Platinum Member
Apr 17, 2001
2,147
0
71
The K7SEM is a pretty good motherboard, but I have stability problems with the intergrated video.
 
Oakenfold

Oakenfold

Diamond Member
Feb 8, 2001
5,740
0
76
obviously targeted at budget buyers who aren't looking for a high-end system
Click to expand...

Um I hate to tell you this but the K7S5A is leagues from high end. Still a good stable board, matter of fact I run it in my main rig now.. Think it's gotta be like the 3rd or 4th I've run in my home pc's.
This might be a good mother in law rig. I think I'd go with an nforce board and buy the cpu separate for and additional 40.00


Description ripped from KREX

Processor
Onboard AMD Duron processor: Support 200MHz FSB
Chipset
SiS 730S single chipset with following features: Integrated advanced 128-bit 2D/3D graphic engine
LPC I/O - ITE IT8705F
System Hardware Monitor: Integrated in ITE IT8705F
LAN: VIA VT6103 (optional)
AC97 Audio Codec: VIA VT1612A
Memory
Two 168-pin DIMM sockets for 3.3V SDRAM (Ready for PC100, PC133)
Maximum: 1.0GB
System BIOS
AMI 2Mb Firmware Hub
Supports Plug and Play 1.0a, AMP 1.2, Multi Boot, DMI
Full Support for ACPI revision 1.0 specification
I/O Interface
Back panel I/O ports
PS/2 keyboard and PS/2 mouse connectors
Dual USB ports
One - EPP/ECP mode parallel port
One - 16550 high-speed serial I/O ports
One VGA Connector
Audio Ports (Line-in, Line-out, Mic-in, CD-in and game port)
Dual PCI IDE interfaces - support four IDE devices (PIO mode 4, DMA Mode 2, Ultra DMA 33/66/100)
Supports 360K~2.88M Byte, 3 Mode FDDs or LS120
ATX Power Supply Connector
Ports, Headers and Others:
IrDA header
Internal PC speaker header
Extra mic. / speaker header
CD-ROM / DVD ROM audio input header
Extra USB ports
HDD LED, Reset Switch, Suspend LED, Power Switch headers
CPU and Chasis Fan headers
RTC & Battery
Integrate CMOS SRAM in SiS 730S
With CMOS hardware clear jumper
Expansion Slots
2 PCI slots, 1 AGP slot, 1 AMR slot
Form Factor
ATX (244mm x 220mm), 4 Layers
Special Features
Supports wake on LAN, wake on modem, interrupt wake-up from keyboard/mouse and keyboard power on/off

 
You must log in or register to reply here.

TRENDING THREADS

COMPANY
RESOURCES
FOLLOW
Top Bottom