• We’re currently investigating an issue related to the forum theme and styling that is impacting page layout and visual formatting. The problem has been identified, and we are actively working on a resolution. There is no impact to user data or functionality, this is strictly a front-end display issue. We’ll post an update once the fix has been deployed. Thanks for your patience while we get this sorted.

Easy Way to Destroy HDD with bad sectors and private data?

I

Infohawk

Lifer
In the past I've run dban on old drives and then donated them to recycling places. I had an HDD with bad sectors and dban wouldn't run on it.

Is there an easy practical way to destroy a harddrive so that nobody could read the data if they find it? I'm looking for something that does not involve explosives or firearms or equipment that is only found at construction sites.
 
Take it apart and remove the platters. It is not that hard. if you want to go the extra mile rub the platters on concrete, asphalt or use some sandpaper.
 

[image removed]

This is not ATOT. Don't thread crap with PB, especially if you actually have nothing to contribute to a serious thread.

Moderator jvroig
 
Last edited:
- Roll over it with a car
- Squeeze it in a bench vise
- Go to the local hardware store and buy a bag of premix concrete. Take drive cover off, mix up some concrete, pour it in, and put the cover back on.
 
JSt0rm said:
[image removed]
Click to expand...

pb always makes me lol.


Thank you for quoting that so I had yet another post to clean up.

Please refrain from doing so in the future, and please do not participate in furthering existing thread derails.

Moderator jvroig
 
Last edited by a moderator:
Dunk it in water, and leave it outside for a few days. You'll get some nice oxidation on the platters turning those fancy magnetic particles into rust.
 
One of ways to ensure no one will try to steal your data is to attach to the HDD the price quote from a reputable service for recovering what's on that drive.
 
Do a full surface scan with windows so that all the bad sectors get reassigned, then dban it.
If it still doesn't run dban, do a full format with windows vista or later. Full format with vista+ writes 0s to entire drive, recovery from that is argued by some theoretical physicists to be "theoretically possible" in the same way that faster then light travel could be achieved via space-time warp is possible.
 
JSt0rm said:
THIS IS NOT A JOKE (I wouldn't do such a thing)

http://www.youtube.com/watch?v=k-ckechIqW0

^^^ this is how you get rid of a hard drive.
Click to expand...

waste of time, money, effort, is unsafe, and potentially illegal.
To top it all off, it is less reliable then writing all 0s. Because writing 0s to entire drive destroys all data, this could, depending on how the thermite flows, leave some portions of undamaged platter. Granted it would take a ridiculous expense to recover any data from something like that.
The military uses a proper furnace to completely melt drives into a liquid.
 
Last edited:
taltamir said:
waste of time, money, effort, is unsafe, and potentially illegal.
To top it all off, it is less reliable then writing all 0s. Because writing 0s to entire drive destroys all data, this could, depending on how the thermite flows, leave some portions of undamaged platter. Granted it would take a ridiculous expense to recover any data from something like that.
The military uses a proper furnace to completely melt drives into a liquid.
Click to expand...

well, its how I get rid of all my electronics.
 
Fire or water may actually not destroy the data.

Nothing short of opening the HDD and mechanically damaging the platters will assure data security. Follow the suggestions to drill, sand, or bend, or shatter them.
 
bryanl said:
Fire or water may actually not destroy the data.
Click to expand...
This is true.

Nothing short of opening the HDD and mechanically damaging the platters will assure data security.
Click to expand...
this is false, mechanical damage to the platter provides inferior data destruction to magnetic destruction (writing 0s). although realistically physical damage with sanding and drilling as you suggest would be effective as well.
 
I've used nuke and boot before but cannot attest to its efficacy in data erasure. Its software available free on net.
 
Remove the cover of the drive. Take a fridge magnet or any magnet reasonably strong, no need to go crazy, move the magnet across the platters back and forth a few times. The data will be corrupted beyond recovery.
 
taltamir said:
This is true.


this is false, mechanical damage to the platter provides inferior data destruction to magnetic destruction (writing 0s). although realistically physical damage with sanding and drilling as you suggest would be effective as well.
Click to expand...

Tell that to the NSA where classified hard drives are sent to be ground up in big grinder.
 
hal2kilo said:
Tell that to the NSA where classified hard drives are sent to be ground up in big grinder.
Click to expand...

I would but they are too stupid to listen. Speaking of government security... Tell me, how effective as the TSA been?
Also, do you have an evidence that the NSA actually does as you say?
I can show you http://en.wikipedia.org/wiki/DOD_5220.22-M
which describes the data shredding technique via writing random data and approved by the US DoD.
EDIT: PS. you and others suggested buffing it, drilling it, and hitting it with a hammer. None of you suggested melting it in a proper kiln (completely melting it) or grinding it to dust, both of which are things a government / army has the means to but the OP and the average home user doesn't. Grinding it to dust and hitting it with a hammer are completely different.
 
Last edited:
i physically open the case and take my anger out on it but hritting it with a big hammer....HAMMER TIME 😀. and i also throw old laptops out the window tosee it explode 😀
 
You must log in or register to reply here.

TRENDING THREADS

Back
Top