• We’re currently investigating an issue related to the forum theme and styling that is impacting page layout and visual formatting. The problem has been identified, and we are actively working on a resolution. There is no impact to user data or functionality, this is strictly a front-end display issue. We’ll post an update once the fix has been deployed. Thanks for your patience while we get this sorted.

Easiest way to remove screws

nycdude

nycdude

Diamond Member
Hi all,

I was trying to install baby gates to the banister via a installation kit. I was attaching a piece of wood next to the banister to secure it. One head snapped off and the other screw just keeps spinning letting me to believe the head broke off also.

What is the easiest way to remove wood screws if the head come off the screw??? I drilled it in and the head snapped off. I think the screw was too long for the job I needed it for. I will get shorter ones going forward but I got 2 in there now.

Any advice.

Thanks
 
Damn, that's goin to be pretty tough. You might have to see if you can whittle some wood away, and then grab the end with a pair of pliers...

I also recommend stronger screws. They shouldn't be breaking, even if they're too long for the job.
 
may want to just leave them in. If they're near the surface, countersink them with a hammer and blunt nail. I suggest pre drilling the holes to prevent the screws from seeing so much resistance.
 
if the screws were that weak, get a small drill bit and drillinto the screw, it will either break it up or alloy you to reverese the drill and back them out.
 
Originally posted by: Eli
Originally posted by: Snapster
Originally posted by: Eli
You might have to see if you can whittle some wood, and then grab the end with a pair of pliers
Click to expand...

That's all you can do imho.
Click to expand...
That's not a direct quote! 😛
Click to expand...

Accidentally left one word out during the edit lol, nice observation........

And an indirect quote is the best you'll get 😉

😀
 
Originally posted by: eagle
There's these little bits called screw extractors, sized like 1-7, but I don't know how they are used. 🙂
Click to expand...
Don't think they would work for a wood screw, they're generally for bolts.
 
I kinda figure that I may be SOL. Thought I'd ask anyway.

I will leave it in for now but when I eventually gotta take it off down the road, the plier trick or the countersink and wood putty may be the way to go.
 
I have Craftsman Screw Outs they would work in this situation if you get the correct size. They are basicly a reversed bit that will bite into the metal. To use them you must have a reversable drill, just press hard and go slow and you should be able to get them out.
 
Next time, rub soap on the screws before screwing them in - the soap lubricates the threads and makes them go in a lot easier!
 
Originally posted by: Barrak
I have Craftsman Screw Outs they would work in this situation if you get the correct size. They are basicly a reversed bit that will bite into the metal. To use them you must have a reversable drill, just press hard and go slow and you should be able to get them out.
Click to expand...

I don't think these work when the whole top head is off the screw but I was checking out the sears site and these may work.

Look at this

Thoughts
Thanks
 
All effective methods of extraction have been mentioned.

1. If enough of the screw is sticking out, you can use some pliers to firmly grasp the remaining threads and back it out....

2. Use a small drill bit to drill through the center of the screw. Just be careful to center the bit so you drill the screw and not the wood.

3. They make screws that have backward threads to remove screws and bolts, but I doubt the screws are big enough to use one of these. They work best on larger bolts that strip off. You can go to Home Depot, Lowes, or another hardware supply store and they'll show you the products they have to offer for this....it'd be best to take on of your screws with you for size comparison.

Furthermore, if the hardware is that cheap, I would consider taking the baby gate back to the store and complain. Get a refund and buy a different brand.
 
How big is the screw itself? You could try slotting it with a Dremel and using a screwdriver, but it sounds like they're too small for that to work.
 
Originally posted by: Scarpozzi
All effective methods of extraction have been mentioned.

1. If enough of the screw is sticking out, you can use some pliers to firmly grasp the remaining threads and back it out....

2. Use a small drill bit to drill through the center of the screw. Just be careful to center the bit so you drill the screw and not the wood.

3. They make screws that have backward threads to remove screws and bolts, but I doubt the screws are big enough to use one of these. They work best on larger bolts that strip off. You can go to Home Depot, Lowes, or another hardware supply store and they'll show you the products they have to offer for this....it'd be best to take on of your screws with you for size comparison.

Furthermore, if the hardware is that cheap, I would consider taking the baby gate back to the store and complain. Get a refund and buy a different brand.
Click to expand...


Could always just tear down the whole wall (or at least the drywall) and put up a new one.

😉
 
If you are talking woodscrews almost all can be easily broken if you hit a metal stud or concrete. That assuming you are using realistic sizes for home use (1/4" shank or less).

 
You must log in or register to reply here.

TRENDING THREADS

Back
Top