Hi all, I just built a new rig, and I am a little puzzled about my temperature readings. I have a evga 680i, and an intel e6600 running at the stock 2.4Ghz, with the stock cooler. I've been considering overclocking, but not until I figure out if these temperatures are normal.
Idle, my system reports both cores at 52°C, using nvidia's monitor tool, and core temp.
Oddly enough, at full load, it only goes up to 57°C. I've tested it using prime95, and super Pi. The fan never seems to change from its 2700-2800 rpms. I have an ambient temperature reading of 35°C inside my Lian-Li PC-65 case.
Does this seem normal? Shouldn't my fan's speed vary with load? I've looked through these and other forums, and the temps don't seem too hot, if I were overclocking, but I'm not. I'm worried that perhaps the fan isn't on right.
Thanks for your help!
Idle, my system reports both cores at 52°C, using nvidia's monitor tool, and core temp.
Oddly enough, at full load, it only goes up to 57°C. I've tested it using prime95, and super Pi. The fan never seems to change from its 2700-2800 rpms. I have an ambient temperature reading of 35°C inside my Lian-Li PC-65 case.
Does this seem normal? Shouldn't my fan's speed vary with load? I've looked through these and other forums, and the temps don't seem too hot, if I were overclocking, but I'm not. I'm worried that perhaps the fan isn't on right.
Thanks for your help!
Facebook
Twitter