Guys,
I have horizontal flickering pixels across my Iiyama Vision Master Pro 453, but only in high resolutions / high refresh rate combinations, and ONLY when using the DVI cable. If I use the std. DSUB cable I have no problems at 1280x1024 at 100Hz. If I switch to the DVI cable it is fine at 1024x768 at 100Hz, but the instant I increase resolution, without lowering the refresh rate to 70Hz, the pixel flickering starts.
So, I tested the DVI cable for connectivity, and found that all the pins connect EXCEPT the big flat "pin", and the top left-most pin, when looking at the male connection holding the big "pin" to the left.
Is anyone out there techy enough to test their DVI cable for me, or does anyone have a suggestion to my problem?
Thanks a bunch in advance.
I have horizontal flickering pixels across my Iiyama Vision Master Pro 453, but only in high resolutions / high refresh rate combinations, and ONLY when using the DVI cable. If I use the std. DSUB cable I have no problems at 1280x1024 at 100Hz. If I switch to the DVI cable it is fine at 1024x768 at 100Hz, but the instant I increase resolution, without lowering the refresh rate to 70Hz, the pixel flickering starts.
So, I tested the DVI cable for connectivity, and found that all the pins connect EXCEPT the big flat "pin", and the top left-most pin, when looking at the male connection holding the big "pin" to the left.
Is anyone out there techy enough to test their DVI cable for me, or does anyone have a suggestion to my problem?
Thanks a bunch in advance.
Facebook
Twitter