Originally posted by: wisdomtooth
Originally posted by: AnotherGuy
ribbon ur the first person who doesnt recommend an Enermax coz of noise... where that come from.... many plp use Enermax
In a quiet PC, you are trying to eliminate as many fans as possible. A PSU with a single 120mm fan will ALWAYS be quieter than a unit with two 80mm fans. A 120mm fan can spin slower and quieter, while moving the same amount of air as a faster-spinning, noisier 80mm fan.
For quietness, definitely Seasonic over Enermax.
Originally posted by: Zebo
I would seriously look into this PSU on your budget fat 35A 12 marketed by newegg (rosewill) read the reviews there. No PSU can touch this specs for price.
http://www2.newegg.com/OldVersion/app/V...Desc.asp?description=17-182-010&depa=0
Originally posted by: syar2003
Eddie i guess we perhaps both have got it wrong . the dual 12v rails are independent and have seperate short circuit protections
as well as the current .
Looking again through the atx12v 2.03 design guide from page 35 .
This is how the design is specified :
+12v1
The +12v connectors in the 20/24 pin is +12vDC-1 rail
The SATA drive power connectors +12v is +12vDC-1 rail
The 4 pins molexes for drives and peripherals is +12vDC-1 rail
The floppy drive connector has +12v from +12vDC-1 rail
+12v2
The 4 pin / 8pin P4 connector has +12v from the +12vDC-2 rail .
http://www.formfactors.org/developer%5Cspecs%5CATX12V%20PSDG2.01.pdf
I was mistaking earlier , thinking the +12v in P4pin and 24pin shared the same rail , and peripherals the other .
So my conclusion is that 15A for the cpu and the other 15A for the rest is probably
less powerful than a single railed 30A if the P4 rail is cpu exclusive in the motherboard design using dual rail psu's.
Perhaps this design is for making it more futureproof than the older specs were , that have been changed a lot of times over the last years.
15A for cpu will sure be enough for a long time regarding single cores Athlon64's when the most wattage hungry
is at max theoretical thermal power @ 89w and 130nm technology , the math will then suggest 7-8A.
Originally posted by: Zebo
I would seriously look into this PSU on your budget fat 35A 12 marketed by newegg (rosewill) read the reviews there. No PSU can touch this specs for price.
http://www2.newegg.com/OldVersion/app/V...Desc.asp?description=17-182-010&depa=0
Wonder who makes them. The much more expensive Coolmax shares the same model # (AP-600X) & the specs are nearly the same.Originally posted by: Zebo
I would seriously look into this PSU on your budget fat 35A 12 marketed by newegg (rosewill) read the reviews there. No PSU can touch this specs for price.
http://www2.newegg.com/OldVersion/app/V...Desc.asp?description=17-182-010&depa=0
