thinking about doing first major upgrade in a few years & none of the socket 754 boards I looked at say they support dual channel memory-do they all ? or none?
do socket 754 boards support dual channel memory?
- Thread starter logear1
- Start date
thinking about doing first major upgrade in a few years & none of the socket 754 boards I looked at say they support dual channel memory-do they all ? or none?
mechBgon
Super Moderator<br>Elite Member
- Oct 31, 1999
- 30,699
- 1
- 0
The memory controller is in the Socket754 processor, so back up a step and look at them instead. The Socket754 processors don't have dual-channel memory controllers, but Socket940 processors do, and Socket939 processors will (when they arrive to market). So the answer is that if you want dual-channel memory controllers right now, you need either an Opteron or an Athlon64 FX, a compatible Socket940 motherboard, and Registered ECC DDR memory (a requirement of both the Opteron and A64FX).
No dual channel but in a way it is there - you can only run two sticks for performance. If you put three the performance drops. 
That is what I call "retarded dual channel."
That is what I call "retarded dual channel."
myocardia
Diamond Member
- Jun 21, 2003
- 9,291
- 30
- 91
You failed English, didn't you? Dual= two, Triple or Treble=3. How could you possible have dual channel with three sticks? By the way, joe, you also get horrible dual-channel performance with one stick!Originally posted by: joe2004
No dual channel but in a way it is there - you can only run two sticks for performance. If you put three the performance drops.
That is what I call "retarded dual channel."
MDE
Lifer
- Jul 17, 2003
- 13,199
- 1
- 81
Most nForce2 boards have 3 DIMM slots, so if you fill them all up then it isn't dual channel anymore?Originally posted by: myocardia
You failed English, didn't you? Dual= two, Triple or Treble=3. How could you possible have dual channel with three sticks? By the way, joe, you also get horrible dual-channel performance with one stick!Originally posted by: joe2004
No dual channel but in a way it is there - you can only run two sticks for performance. If you put three the performance drops.
That is what I call "retarded dual channel."
And yet again one of many personal attacks that miocardia thinks are making him look smart. Sooner or later you'll get banned so enjoy yourself while you can. You must be a fun person to be around.:disgust:
Jeff7181
Lifer
- Aug 21, 2002
- 18,368
- 11
- 81
Originally posted by: myocardia
You failed English, didn't you? Dual= two, Triple or Treble=3. How could you possible have dual channel with three sticks? By the way, joe, you also get horrible dual-channel performance with one stick!Originally posted by: joe2004
No dual channel but in a way it is there - you can only run two sticks for performance. If you put three the performance drops.
That is what I call "retarded dual channel."
Because DIMM slots 0 and 1 are on the first channel and 3 is the 2nd channel. So for 1 GB of RAM AND dual channel you could set something up like this...
DIMM 0 = empty
DIMM 1 = 512
DIMM 2 = 512
DIMM 0 = 256
DIMM 1 = 256
DIMM 2 = 512
Or you could have 768...
DIMM 0 = 256
DIMM 1 = 256
DIMM 2 = 256
DIMM 0 = empty
DIMM 1 = 512
DIMM 2 = 256
And the list goes on...
How am I the one that flames anybody? Have you read the thread.
I only said that in 754 you should not expect to be able to use 3 dimms successfully, that is all. Meaning that you can use 2 only to get a decent performance. Since 754 has no dual channel I call this performance a retarded dual channel, that is all. No reference to any of the members here.
On the contrary this "miocardia" guy has taken a personal attack approach on me, and I am not the only one who has been adressed that way by him.
That needs explanation?
myocardia
Diamond Member
- Jun 21, 2003
- 9,291
- 30
- 91
Yes, and you will still have dual-channel, as long as both channels have the same amount of ram (i.e.-- 2x256 sticks in one channel, 1x512 stick in the other).Originally posted by: MonkeyDriveExpress
Most nForce2 boards have 3 DIMM slots, so if you fill them all up then it isn't dual channel anymore?Originally posted by: myocardia
You failed English, didn't you? Dual= two, Triple or Treble=3. How could you possible have dual channel with three sticks? By the way, joe, you also get horrible dual-channel performance with one stick!Originally posted by: joe2004
No dual channel but in a way it is there - you can only run two sticks for performance. If you put three the performance drops.
That is what I call "retarded dual channel."You CAN have 3 sticks of RAM in dual channel, one controller just deals with more memory than the other.
Jeff7181
Lifer
- Aug 21, 2002
- 18,368
- 11
- 81
Originally posted by: myocardia
Yes, and you will still have dual-channel, as long as both channels have the same amount of ram (i.e.-- 2x256 sticks in one channel, 1x512 stick in the other).Originally posted by: MonkeyDriveExpress
Most nForce2 boards have 3 DIMM slots, so if you fill them all up then it isn't dual channel anymore?Originally posted by: myocardia
You failed English, didn't you? Dual= two, Triple or Treble=3. How could you possible have dual channel with three sticks? By the way, joe, you also get horrible dual-channel performance with one stick!Originally posted by: joe2004
No dual channel but in a way it is there - you can only run two sticks for performance. If you put three the performance drops.
That is what I call "retarded dual channel."You CAN have 3 sticks of RAM in dual channel, one controller just deals with more memory than the other.
It doesn't have to be the same amount, just the same type, for example... it all has to be 32x64... you can't use 32x64 and 16x64.
- Aug 22, 2001
- 31,760
- 31,746
- 146
Another perfectly worded response that dispels any confusion the original poster might be having on the subject, good to have you back Mech!
I will try to sumarize how dual channel works.
Dual channel, is a memory architecture that alternates data between 2 channels to do 2 things. One thing dual channel does is increase memory bandwith, the other thing dual channel does is lower latency. The Socket 754 does not support any form of dual channel, therefore 1, 2, or 3 sticks would all perform equally assuming they were the same quantity.
To run dual channel in a dual channel board, all you have to do is have some memory in each channel. although you can run with uneven sizes in each channel, it is not recomended becuase, if there is 256MB in one channel and 512MB in the other channel, then the 256 will be fully dual channel with 256MB of the other stick, while the remaining 256MB will not be dual channel. But if there was 256 in one channel, and 256 in the other, then you would have 100% dual channel.
Dual channel can have uneven dimm sizes, but dual channel will only actually be working with equal amounts.
Dual channel, is a memory architecture that alternates data between 2 channels to do 2 things. One thing dual channel does is increase memory bandwith, the other thing dual channel does is lower latency. The Socket 754 does not support any form of dual channel, therefore 1, 2, or 3 sticks would all perform equally assuming they were the same quantity.
To run dual channel in a dual channel board, all you have to do is have some memory in each channel. although you can run with uneven sizes in each channel, it is not recomended becuase, if there is 256MB in one channel and 512MB in the other channel, then the 256 will be fully dual channel with 256MB of the other stick, while the remaining 256MB will not be dual channel. But if there was 256 in one channel, and 256 in the other, then you would have 100% dual channel.
Dual channel can have uneven dimm sizes, but dual channel will only actually be working with equal amounts.
TRENDING THREADS
-
Discussion Zen 5 Speculation (EPYC Turin and Strix Point/Granite Ridge - Ryzen 9000)- Started by DisEnchantment
- Replies: 25K
-
Discussion Intel Meteor, Arrow, Lunar & Panther Lakes Discussion Threads
- Started by Tigerick
- Replies: 21K
-
Discussion Intel current and future Lakes & Rapids thread- Started by TheF34RChannel
- Replies: 23K
-
-
Facebook
Twitter