Dlink DI 624

[ic3cr34m]

I just bought Dlink DI 624. The setup is:

ADSL modem (USB) connected to PC1
PC1's NIC configured as 192.168.0.1
PC1's NIC connected to DI 624
DI 624 configured as 192.168.0.2
DI 624 port 2 connected to PC2
PC 2 is using DHCP from DI 624

I tried to connect PC1 to port 1 and PC1 to ADSL modem port. There is no difference between the ports.
I have flash it to version 2.50b

The problem is PC2 cannot connect to internet. Anybody can help?

The file/printer sharing internally is OK - between PC1 and PC2.

Thanks.

 

[Crusty]

Sounds like PC2 isn't getting an IP address.

Do this:
Start->run->cmd

then type ipconfig

what is the IP address that it gives for PC2?

 

[ic3cr34m]

ip address : 192.168.0.104
subnet mask : 255.255.255.0
gateway : 192.168.0.1 - > this is what PC1 has on the NIC (connected to DI 624)

I also tried to put static IP, 192.168.0.3. it doesnt work

 

[ic3cr34m]

Thanks MCrusty,

I figured it out. I need to setup the Router ip address to 192.168.0.254

I don't understand why. Can anyone explain?

Thanks

 

[Mokmo418]

You PC1 has the same IP as your router!
You should set it like DHCP does on the system
start with 192.168.1.101 for pc1 and go up
There is also a static dhcp option in the router's menus so you can assign a particular ip to a given MAC adress. If you don't have this option, just get the newest firmware on d-link's website.