DIR-655 Router Security Question

[ricleo2]

I, amazingly to me, have successfully set up a wireless connection for my wife's lap top. Recently I was checking out Dell Network Assistant when it said the network I setup was unsecured. Does this mean anybody can tie into my wireless network easily, if they know what they are doing? Is their someway I can check and test the security features on this router?
Please understand that I know nothing about networking. So if you are kind enough to help me, keep that in mind. Thank you.

 

[JackMDS]

If it is Unsecured it can be every bodies connection.

From the weakest to the strongest, Wireless security capacity is.
No Security
MAC______(Band Aid if nothing else is available).
WEP64____(Easy, to "Brake" by knowledgeable people).
WEP128___(A little Harder, but "Hackable" too).
WPA-PSK__(Very Hard to Brake ).
WPA-AES__(Not functionally Breakable)
WPA2____ (Not functionally Breakable).

Note 1: WPA-AES the the current entry level rendition of WPA2.

Note 2: If you use WinXP and did not updated it you would have to download the WPA2 patch from Microsoft. http://support.microsoft.com/kb/893357

The documentation of your Wireless devices (Wireless Router, and Wireless Computer's Card) should state the type of security that is available with your Wireless hardware.

All devices MUST be set to the same security level using the same pass phrase.
Therefore the security must be set according what ever is the best possible of one of the Wireless devices.

I.e. even if most of your system might be capable to be configured to the max. with WPA2, but one device is only capable to be configured to max . of WEP, to whole system must be configured to WEP.
If you need more good security and one device (like a Wireless card that can do WEP only) is holding better security for the whole Network, replace the device with a better one.

Setting Wireless Security - http://www.ezlan.net/Wireless_Security.html

The Core differences between WEP, WPA, and WPA2 - http://www.ezlan.net/wpa_wep.html

 

[ricleo2]

Originally posted by: JackMDS
If it is Unsecured it can be every bodies connection.

From the weakest to the strongest, Wireless security capacity is.
No Security
MAC______(Band Aid if nothing else is available).
WEP64____(Easy, to "Brake" by knowledgeable people).
WEP128___(A little Harder, but "Hackable" too).
WPA-PSK__(Very Hard to Brake ).
WPA-AES__(Not functionally Breakable)
WPA2____ (Not functionally Breakable).

Note 1: WPA-AES the the current entry level rendition of WPA2.

Note 2: If you use WinXP and did not updated it you would have to download the WPA2 patch from Microsoft. http://support.microsoft.com/kb/893357

The documentation of your Wireless devices (Wireless Router, and Wireless Computer's Card) should state the type of security that is available with your Wireless hardware.

All devices MUST be set to the same security level using the same pass phrase.
Therefore the security must be set according what ever is the best possible of one of the Wireless devices.

I.e. even if most of your system might be capable to be configured to the max. with WPA2, but one device is only capable to be configured to max . of WEP, to whole system must be configured to WEP.
If you need more good security and one device (like a Wireless card that can do WEP only) is holding better security for the whole Network, replace the device with a better one.

Setting Wireless Security - http://www.ezlan.net/Wireless_Security.html

The Core differences between WEP, WPA, and WPA2 - http://www.ezlan.net/wpa_wep.html

You the man, Jack! Thanks to you I have successfully set up WPA2 security. After reading the links you supplied and my routers manual, it was a piece of cake. Thank you.