• We’re currently investigating an issue related to the forum theme and styling that is impacting page layout and visual formatting. The problem has been identified, and we are actively working on a resolution. There is no impact to user data or functionality, this is strictly a front-end display issue. We’ll post an update once the fix has been deployed. Thanks for your patience while we get this sorted.

DFI NF4 ULTRA-D woes...

L

larry89

Senior member
MY system Specs
Fortron Blue Storm 500W PSU
DFI NF4 ULTRA-D
Sapphire ATI Radeon x800xl
Athlon 64 3000+ w/ Zalman 7000cu Copper Cooler
WD 80GB SATA Hard Drive
Audigy 2 ZS
Lite-On 52x32x52x16 CD-RW Drive

And finally the heart of the problem...
2x512MB OCZ Platinum Rev. 2 RAM (One In Mobo due to not POSTing)

Flashed bios using Winflash to beta 2.01 Set dram voltage to 2.7v Still no Post

Plugged in 4 pin molex and the other 4 pin molex thingy (hdd type) using 24 pin molex..

wtf is the problem -.-
 
Run memtest on each stick and see if either of them is defective. Also, if you've been trying dual channel in slots 1&3, try 2&4, and vica versa.
 
I have an Ultra-D (201 official bios) w/ 2x512 PC3200 OCZ EL Plat. Rev 2's as well, and I am using an OCZ 520w PowerStream PSU. I only have the 24-pin ATX and the 4 pin 12v plugged in (not the 2 above PCI-E slot #1). I have my dimms in slot's 2 & 4 (highly recommended) @ 2-2-2-5 2.6v and it's rock solid.

Try each dimm in slot 2 and run memtest for 1 pass as cheese suggested. If both pass try one in dimm 2 & one in 4.
 
You must log in or register to reply here.

TRENDING THREADS

Back
Top