DFI LanParty DK P35-T2RS

[kschaffner]

Hi everyone, I am by no means a newbie when it comes to overclocking procs but for some reason and it could just be something different with this board but I do not have an option in the voltage menu to adjust the cpu's vcore. I can adjust other things like the vid and the vtt however I'm not sure what they do on this board, dfi's site sucks and the manual is useless. I have the intel xeon e3110 and I want to push this baby to a high oc using a tuniq tower. Help please. Thanks, Kaleb

 

[lopri]

Check this review. DK P35 should be similar to UT P35.

http://www.anandtech.com/mb/showdoc.aspx?i=3129

 

[kschaffner]

ah so basically when the cpu vid special add says to add 50 mv its basically like .05v on the vcore....dfi and their crazy ways. One thing that is different is that the cpu vid control is not a feature on my board. So I guess it's just the cpu vid special add.

 

[lopri]

It can be quite useful, though.

 

[kschaffner]

well that was easy 4.0ghz on air and I will test it overnight using p95
http://img72.imageshack.us/my.php?image=93855545rg0.jpg

 

[kschaffner]

well this however is no fun. I tried to oc to 4.3ghz however I don't have a fsb strap low enough for my memory to run slow enough. If I want to run at 4.3ghz my ddr2-800 kit needs to oc to ddr2-957 lol and it just doesn't like that.

 

[kschaffner]

it is however running at ddr2-890 at 2.05v, How high can you adjust the v on the ram where it may be able to oc that high without killing the sticks.

 

[aigomorla]

Originally posted by: kschaffner
well that was easy 4.0ghz on air and I will test it overnight using p95
http://img72.imageshack.us/my.php?image=93855545rg0.jpg

Very nice! Yes i love my 2 LT X38's

 

[kschaffner]

After looking around on the forums there are some users who have a cpu temp of like 30c load with the same oc as me and they are using air... Is there something I should do to reduce my temps?? 40c idle 60c load is current