detecting array... problem

[DarinA21]

I just built my first computer and it has been up and running great for about three weeks. Then this morning I woke up and the boot screen just hangs and says "detecting array..."
I did not change any settings at all. Any help would be greatly appreciated. My mobo is a Epox 9NPA+Ultra. Thanks.

 

[amdskip]

Are you running a raid array at all? You will know if you have one.

 

[DarinA21]

not that I know of no.

 

[DarinA21]

bump

 

[boomerang]

Dig out the manual and reset the CMOS. Follow the directions exactly as stated in the manual. I cannot stress this enough.

You may want to give everything inside a close visual inspection first. You may just have a cable unplugged or loose.

 

[DarinA21]

Thanks for the help, I tried resetting the cmos with the jumper settings and still the same problem. I am not even using SATA I am just using ide. This is weird.

 

[Randum]

check your boot priority in the bios, and if possible turn off the RAID funtionality on the mobo all together to eliminate this.

 

[DarinA21]

Thanks, my boot priority is HDD,HDD, CD-rom (I don't have a floppy drive). I will try removing the raid tonight.