DeepCool Lucifer v2 is compatible with corsair's products ?

[presentxy]

Hi everyone i'm new in this forum.I have AMD PHENOM II X6 1100T and Corsair 200R chase and Corsair Vengeance memory.So lucifer v2 is compatible with this products ? How much overclock my cpu and which voltage ?

Note:My English is not very well.

Thanks for answers...

 

[i7Baby]

http://www.deepcool.com/product/gamerstorm/2014-05/6_867.shtml

says it's compatible with Phenom II X6 (including 1100T)

It also shows its 168mm high.

The 200R - http://www.corsair.com/en/carbide-series-200r-compact-atx-case - says it can only fit a cooler less than 165mm high So - NO GO!!!


The cooler spec also shows 43mm clearnace under it for ram (non fan side)

http://www.overclock.net/t/1004219/officia-l-asus-rog-maximus-iv-gene-z68-z68-gen3-owners-club/2040 shows the memory is 52.5mm high - so NO GO!!! again.

 

[presentxy]

http://www.deepcool.com/product/gamerstorm/2014-05/6_867.shtml

says it's compatible with Phenom II X6 (including 1100T)

It also shows its 168mm high.

The 200R - http://www.corsair.com/en/carbide-series-200r-compact-atx-case - says it can only fit a cooler less than 165mm high So - NO GO!!!


The cooler spec also shows 43mm clearnace under it for ram (non fan side)

http://www.overclock.net/t/1004219/officia-l-asus-rog-maximus-iv-gene-z68-z68-gen3-owners-club/2040 shows the memory is 52.5mm high - so NO GO!!! again.

of course i check chase specs before writing post but i dont know about memory thanks for that.so what im gonna do i cant buy this cooler,and this cooler very little diffrence against NOCTUA D15...

so what do you suggest ? XIGMATEK AEGIR ?

 

[DrMrLordX]

I would recommend the cases & cooling section for your inquiry.

 

[ClockHound]

of course i check chase specs before writing post but i dont know about memory thanks for that.so what im gonna do i cant buy this cooler,and this cooler very little diffrence against NOCTUA D15...

so what do you suggest ? XIGMATEK AEGIR ?

Not sure what mis-guided review gave you the impression that the lucifer is a close match to the D15. In all of the reviews from reputable sites that I've seen the lucifer is in the range of 5 to 11 degrees hotter than the D15 depending on the test platform.

On the AMD platform, the Silverstone HE01 performs very close to the D15. The HE01 is 164mm so should just fit your case. It has a narrower first tower, so it clears tall ram. That would be my first choice.

In the single tower format, the Cryorig H5 or Scythe Kotetsu/Mugen 4 would be very good non-ram-blocking choices.

I once used a Hyper 212 (with 2 AP15 GT fans) to overclock my 1100T fairly high. So a Hyper 212 with a pair of EK Vardar F3s or Darkside GTs is a good option as well.

 

[presentxy]

Not sure what mis-guided review gave you the impression that the lucifer is a close match to the D15. In all of the reviews from reputable sites that I've seen the lucifer is in the range of 5 to 11 degrees hotter than the D15 depending on the test platform.

On the AMD platform, the Silverstone HE01 performs very close to the D15. The HE01 is 164mm so should just fit your case. It has a narrower first tower, so it clears tall ram. That would be my first choice.

In the single tower format, the Cryorig H5 or Scythe Kotetsu/Mugen 4 would be very good non-ram-blocking choices.

I once used a Hyper 212 (with 2 AP15 GT fans) to overclock my 1100T fairly high. So a Hyper 212 with a pair of EK Vardar F3s or Darkside GTs is a good option as well.

It is 5-8 degree max.So its nothing for me accualy,because in my country price difference a lot(noctua's price almost 2xlucifer v2 in Turkey) it wont worth am i wrong ? And i cant buy your suggest products because not selling my country but i can buy (cooler master,akasa,thermaltake,xigmatek,deepcool) i want oc my 1100T to 4.2 ghz with good cooling . What do you think about you guys xigmatek aegir ?

 

[ClockHound]

The xigmatek aegir is a decent, average cooler, from 2010. Works best with 2 fans in push/pull, but its stock fans are really loud. 63dB loud. About 5 times louder than a D15 at full load. So there's that.

The Akasa Venom Medusa twin tower cooler or Venom Voodoo might be a consideration. But, may block ram and the 1st PCie slot.

Unless the aegir is a much better price, a Coolermaster Hyper 212 with a pair of GTs/Vardars would be better and quieter. Or, for lower cost a pair of YateLoons or Arctic Cooling F12 PWMs.

Do you have Phanteks or Thermalright available in Turkey?

 

[presentxy]

The xigmatek aegir is a decent, average cooler, from 2010. Works best with 2 fans in push/pull, but its stock fans are really loud. 63dB loud. About 5 times louder than a D15 at full load. So there's that.

The Akasa Venom Medusa twin tower cooler or Venom Voodoo might be a consideration. But, may block ram and the 1st PCie slot.

Unless the aegir is a much better price, a Coolermaster Hyper 212 with a pair of GTs/Vardars would be better and quieter. Or, for lower cost a pair of YateLoons or Arctic Cooling F12 PWMs.

Do you have Phanteks or Thermalright available in Turkey?

i have 6 fan my 200r so i dont care noise are u saying hyper 212 better than aegir ? aegir better than hyper 212 and it is come from 2010 but it is a cooler not food thanks for answer really

i'm confused

http://www.hardwaresecrets.com/wp-content/uploads/hyper212evog1.gif

http://www.maximumpc.com/xigmatek-aegir-review/

aegir heavyer than hyper 212 and aegir have 6 copper hyper 212 4 copper...

no, we have antec,silverstone but not all products ... still a lot of product...

 

[ClockHound]

If you're not worried about fan noise, then the Aegir with two fans could offer a few degrees better temps than the 212. And the Xigmatek mounting system is easier to use than the coolermaster.

Does the version of the Aegir sold in Turkey come with 2 fans or 1?

 

[presentxy]

If you're not worried about fan noise, then the Aegir with two fans could offer a few degrees better temps than the 212. And the Xigmatek mounting system is easier to use than the coolermaster.

Does the version of the Aegir sold in Turkey come with 2 fans or 1?

1 fan version selling here but i use aegir akasa viper s-flow and xigmatek aegirs fan,i worry about memory i hope it wont make trouble...

 

[ClockHound]

What model of motherboard are you using?

 

[presentxy]

What model of motherboard are you using?

if i buy xigmatek aegir how much oc my phenom ıı x6 1100T and which voltage ?

MY PC SPECS:

MSI 970 GAMING MOTHERBOARD
AMD PHENOM II X6 1100T @3.5 GHZ WITH XIGMATEK HDT-D1264
CORSAIR VENGEANCE 2X4GB DUAL CHANNEL 1600MHZ
KINGSTON V300 120GB SSD
WD CAVAIR BLUE 1TB HDD
CORSAIR VS650
CORSAIR CARBIDE 200R

FRONT SIDE 2X120MM CORSAIR FAN
TOP SIDE THERMALTAKE BLUE 120MM AND XILENCE RED 120MM
REAR SIDE XIGMATEK 120MM FAN
CPU FAN AKASA VENOM 14CM S-FLOW (COMPATIBLE 12CM)

 

[ClockHound]

You already have the 1284, yes?

The aegir with 2 fans will give you roughly 4-5 degrees better temps than the 1284. How much more you can overclock will depend on what voltage is required to hit 3.5 now. I don't what that is, only you do. ;-)

On my old 1100, managed to get 3.8 stable with 2 GTs on a 212. At 4.0 the 212 gave up. And so did I.

 

[presentxy]

You already have the 1284, yes?

The aegir and with 2 fans will give you roughly 4-5 degrees better temps than the 1284. How much more you can overclock will depend on what voltage is required to hit 3.5 now. I don't what that is, only you do. ;-)

On my old 1100, managed to get 3.8 stable with 2 GTs on a 212. At 4.0 the 212 gave up. And so did I.

i have this cooler.are u sure about 4-5 cantigrat ?.1.384 VOLTAGE and 3.5 ghz so,what is the best solutions ? aegir,hyper 212 evo,lucifer v2 maybe,akasa venom,deepcool neptwin v2,akasa venom medusa could you rank these thing start from 1)...

thanks for answers.

edit:im sorry i write wrong not 1284,1264 is mine

 

[ClockHound]

Here's my (unofficial) ranking:

1. Akasa Venom Medusa - it's a big twin tower and probably offers the best overclock temps - HOWEVER, it will overhang the 1st two ram slots. Likely hitting your ram. Could move the front fan up, but with the cooler height of 163mm and the case has a max cooler depth of 165mm there's not much to play with. You could contact Akasa and ask about compatibility with your MB, ram and case.

2. Xigmatek Aegirs - Decent compatibility and slightly better than a 212 with 2 fans.

3. Hyper 212 - with 2 fans as mentioned earlier.

4. All the rest are a distant 4th...and lucifer v2 is a no in your case and ram.

Appears you still have some voltage headroom left, 3.8 is a reasonable goal. Even 4 might be possible.

 

[presentxy]

Here's my (unofficial) ranking:

1. Akasa Venom Medusa - it's a big twin tower and probably offers the best overclock temps - HOWEVER, it will overhang the 1st two ram slots. Likely hitting your ram. Could move the front fan up, but with the cooler height of 163mm and the case has a max cooler depth of 165mm there's not much to play with. You could contact Akasa and ask about compatibility with your MB, ram and case.

2. Xigmatek Aegirs - Decent compatibility and slightly better than a 212 with 2 fans.

3. Hyper 212 - with 2 fans as mentioned earlier.

4. All the rest are a distant 4th...and lucifer v2 is a no in your case and ram.

Appears you still have some voltage headroom left, 3.8 is a reasonable goal. Even 4 might be possible.

i bought aegir and 3.8GHZ same voltage max degree 45 and very huge diffrence against hdt d1264-d1284...

 

[ClockHound]

Congrats! That's a great result. Now we can finally move this thread over to cases and cooling. ;-)

 

[presentxy]

Congrats! That's a great result. Now we can finally move this thread over to cases and cooling. ;-)

After 1 hour BF4 45 degree max but full speed all fans.