• We’re currently investigating an issue related to the forum theme and styling that is impacting page layout and visual formatting. The problem has been identified, and we are actively working on a resolution. There is no impact to user data or functionality, this is strictly a front-end display issue. We’ll post an update once the fix has been deployed. Thanks for your patience while we get this sorted.

cutting floppy cables down to size...

eyor

Banned
I have about 21 inches of extra floppy cable in my case... can I cut it off? I know that I am not allowed to cut the twisted part, but what can I cut off? and how should I do it?
thanks
 
All you need to do is cut the cable with sisors just behind the middle connector and plug what used to be the middle connector into the motherboard. I have done this on the last 3 motherboards I have put in and it works great.
 
No, you don't need to cover the cut part. If you look at a stock cable, the ends of the cable are left open. It won't hurt anything.

amish
 
So I should just leave the openwires hanging there? And can I cut the thinger off the very top of the cable?
 
Cut everything above the connector that has the twist.

Cut everything below the connector just below the connector with the twist.

That should leave you with a connector for the motherboard and the connector with the twist for the floppy.

I used a razor knife when I did mine and cut the cables right up close to the connectors.

Here's a link that explains it.

amish
 
Back
Top