• We’re currently investigating an issue related to the forum theme and styling that is impacting page layout and visual formatting. The problem has been identified, and we are actively working on a resolution. There is no impact to user data or functionality, this is strictly a front-end display issue. We’ll post an update once the fix has been deployed. Thanks for your patience while we get this sorted.

CUSL2/1002 BIOS and Onboard Video

W

WonderfulDuff

Junior Member
😕

I recently flashed the 1002 BIOS on my CUSL2. Everything was fine. I had no problems when restarting after flash (i.e. no blank screen after powering, etc.). However, a few days later I decided to re-install Windows. After the re-install the board did not detect my GeForce2 so I wanted to remove it, restart without it (using the onboard video), reinstall the card and restart again. When I went into the BIOS I found that there was no longer an option to enable onboard video. I also remembered, that when I was installing the motherboard drivers from the ASUS CD-ROM, it did not give me an option to install the onboard video drivers.

I then flashed back to the 1001a BIOS and I was able to enable and use onboard video, install the drivers from the CD-ROM (the option re-appeared) and reinstall and detect my GeForce 2. Everything is fine now.

Two questions:

1. Why did I have to remove and reinstall my video card in order for it to be detected?

2. What happened to the onboard video with 1002 BIOS?

Thanks for your help,

WonderfulDuff
 
You must log in or register to reply here.

TRENDING THREADS

Back
Top