ok i have been having problems with my asus a8v i had the problem were i couldnt get my raptor hard drive to be found got the windows does not detect drive thing. Then i had problems with that dula channel thing not working. i have found away to fix it (i think/ worked for me)
i have a rev. 2 board with 4x256mb of kingston hyper x that is meant to work in dual channel but it wasnt working. My board wouldnt post when i had ram in any ofthe a1 or a2 slots it would only post if i had 1 stick in b1 and i could also put a stick in b2 also but thats not dual channel mode.
steps:
1 turn you comp off. take the bios battery out and clear cmos.
2 take ALL ram out of your system
3 take the graphic card out
4 re-set your cpu (take it out and put it back in the socket)
5 i waited about ten minutes before i put my parts back into my comp. after that i put my ram in then my cpu and then my graphics card and last the battery for the bios. i started the machine up and it posted. (also moved my hd to the via sata port 2)
hope this can help some (maybe alot) of you with this problem
i have a rev. 2 board with 4x256mb of kingston hyper x that is meant to work in dual channel but it wasnt working. My board wouldnt post when i had ram in any ofthe a1 or a2 slots it would only post if i had 1 stick in b1 and i could also put a stick in b2 also but thats not dual channel mode.
steps:
1 turn you comp off. take the bios battery out and clear cmos.
2 take ALL ram out of your system
3 take the graphic card out
4 re-set your cpu (take it out and put it back in the socket)
5 i waited about ten minutes before i put my parts back into my comp. after that i put my ram in then my cpu and then my graphics card and last the battery for the bios. i started the machine up and it posted. (also moved my hd to the via sata port 2)
hope this can help some (maybe alot) of you with this problem
Facebook
Twitter