CRUCIAL DDR and A7M.. Need your Help Peeps

[GetFunk]

I heard the mem Voltage comes incorrect settings on the board. What should i set them at... The board came with them on pin 3and4, and the book says defualt is 1and2.. so what is it.... Plz Help.. I wanna getthis bitch up and running.. but i dont wanna burn the ram

 

[Soccerman]

bump, I don't know the answer, but I know someone here should..

 

[shikhan]

I've just got it set on jumperless and left everythign pretty much the way it is. Works like a charm

 

[tristramshandy]

There are conflicting reports about this. Many people have not changed the default VI01 jumper, which is set to 2.8v, and they've had brilliant performance. For other folks -- especially those using Samsung ddr -- lostcircuits.com has indicated that the jumper needs removing and VI01 set back to 2.5v. Others say it makes no difference.



http://www.lostcircuits.com/motherboard/asus_a7m266/6.shtml

 

[tristramshandy]

Go wiggle.

 

[GetFunk]

Thanks... Ill check out that site... So you recomend that i leave it where its set for Crucial DDR. Or change it to 2.5v instead of the 2.8. I dont wanna fry my new ram, or hurt my new mobo.... thanks...

BUMP

 

[Bingo13]

For Crucial memory leave it at the factory setting of 2.7v, if you have a revision 1.4 board then the 1.2 manual is incorrect. You can faintly see the changes on the board.