cpu temp on cusl2

[XL]

I just installed my cusl2.I got an 800e fc.Now the temp reading i'm getting using asus pc probe and hardware monitor (in the bios) both say 50f give or take a few degrees.What I'd like to know is are the y right.

 

[AndyHui]

If you are using the original 1001A BIOS, then the temperature is not right. Upgrade to 1002 or 1003 for a more accurate reading. The reading is off by some 18 degrees C.

Remember to read the instructions on ASUS's website before flashing.

 

[XL]

Yep. those are the bios i'm using. Thanks Andy

 

[Mikewarrior2]

WEll, if you're using the old asus pc probe, even if you upgrade the bios the problem still exists.

use either mbm 4.18(or later) or upgrade the pcprobe version. you can get the newer one at CUSL2 website


Mike