• We’re currently investigating an issue related to the forum theme and styling that is impacting page layout and visual formatting. The problem has been identified, and we are actively working on a resolution. There is no impact to user data or functionality, this is strictly a front-end display issue. We’ll post an update once the fix has been deployed. Thanks for your patience while we get this sorted.

Corrupted windows msg during OC

T

Tiamat

Lifer
I was overclocking from 170fsb to 185FSB and I got a msg about some file being corrupted in the windows folder (windows did not boot). I then Upped my CPU voltage by 0.1V and it seems to have corrected the problem. Does this mean that if I see this msg again during a further OC, it just means that the CPU is not receiving enough voltage (and I should add more voltage)?
 
Messages like that are common when overclocking and the system is not stable. It doesn't always mean it's due to the CPU, as it could also be the MB or the memory that is unstable.

However, since you raised the Vcore 0.1v, it likely means the CPU was unstable at the lower voltage.

What chip do you have and what voltage are you currenly running?
 
Originally posted by: BlueWeasel
Messages like that are common when overclocking and the system is not stable. It doesn't always mean it's due to the CPU, as it could also be the MB or the memory that is unstable.

However, since you raised the Vcore 0.1v, it likely means the CPU was unstable at the lower voltage.

What chip do you have and what voltage are you currenly running?
Click to expand...

Sorry, I didnt mark down the full stepping before I attached my HS, But its a Tbred-B DLT3C 1800+ and the Voltage is now at 1.6V
 
You must log in or register to reply here.

TRENDING THREADS

Back
Top