COOLER MASTER ATC-201B Two Front Fans

[react]

I've owned this beautiful case for about 6 months now. I could never figure out how to replace the 2 front fans. Does anyone know how to do this? I want to stick panaflos in there.

 

[hmsrolst]

I have a 201C which I think is the same layout. First remove the front bezel by taking out the 6 hex screws. Then remove the grill that covers the fan--two screws on each side as I recall. Then you can just unscrew the fans and replace them. I did it with mine, and it's much quieter.

 

[react]

Ahh I ddidn't know you could remove the front bezel. I don't think I have a screw driver that can remove the hex screws?

 

[hmsrolst]

You should be able to get a set of them inexpensively.

 

[beatle]

You don't need to remove the hex screws! Sorry, just had to get that out. I have the 201B and you can remove the front grill (also good for cleaning the filter) by removing 4 phillips head screws. on the side of the grill (remove the case side panels to see them - they are recessed behind part of the case). This will allow you to access the fans which are screwed onto the case. This is MUCH easier than removing the hex screws, since lining them back up can be somewhat of a chore.

 

[hmsrolst]

Thanks, I never noticed that you could get to the screws with the side off. You're right that aligning things on re-assembly of the front is a bit of a chore.