**Computer Pics** :) Lit up and ready for viewing...

[bjc112]

Originally posted by: jjsole
looks sharp. good choices.

:beer:

Thank you sir.

 

[Sid59]

cool .. i can never have my computer next to me on my desk. just doesn't feel right.

 

[AkumaX]

Originally posted by: bjc112

Originally posted by: AkumaX yup, 1st stick can go in 1 or 2, 2nd stick has to be in 3

That doesn't make sense.. I have my first stick in 2 and second in 3 then... So it has to be 1 -> 3 then? Correct?

yeah, that's how epox labeled them.. i was going by the picture

so one has to be in the far slot, while any other can be in the 2 nearest slots

that's how they wanted to distinguish just in case you wanted to do dc but if you had an odd # or sticks

(like, if you want 1gb dc, but you had 2 x 256 and 1 x 512)

 

[Walleye]

Originally posted by: xcript

Originally posted by: bjc112

Originally posted by: xcript

Originally posted by: Walleye
(from 1.35 to 1.75 (or 1.8))

Stock is 1.5v isn't it?

Yes.

Damn. You beat me.

eh, whatever

i thought it was 1.35... i know i saw 1.35 on my 2400, is that the core voltage? i thought it was... oh well, whatever

 

[bjc112]

Originally posted by: bobcpg
I'm looking at my manual and i still dont think your using the dual memory channel

try to get some pic of the manual up.... look at page 3-2

I don''t believe i am..

I was looking at the 64 bit config...

 

[bjc112]

Epox Manual

 

[bjc112]

Originally posted by: Walleye

Originally posted by: xcript

Originally posted by: bjc112

Originally posted by: xcript

Originally posted by: Walleye
(from 1.35 to 1.75 (or 1.8))

Stock is 1.5v isn't it?

Yes.

Damn. You beat me.

eh, whatever

i thought it was 1.35... i know i saw 1.35 on my 2400, is that the core voltage? i thought it was... oh well, whatever

I believe it's 1.65 on a Barton, Couldn't be chipset either ( normally 1.6v )

Don't think there are any 1.35 v on current boards/CPU's

 

[bobcpg]

Originally posted by: bjc112
Epox Manual

yep, notice the first note in the NOTES: section

dimm 2 and 3 are shared memory channel and they are grouped together, while dimm1 is dedicated for the 2 channel and is distant from the other 2.

bob

 

[Walleye]

Originally posted by: bjc112

Originally posted by: Walleye

Originally posted by: xcript

Originally posted by: bjc112

Originally posted by: xcript

Originally posted by: Walleye
(from 1.35 to 1.75 (or 1.8))

Stock is 1.5v isn't it?

Yes.

Damn. You beat me.

eh, whatever

i thought it was 1.35... i know i saw 1.35 on my 2400, is that the core voltage? i thought it was... oh well, whatever

I believe it's 1.65 on a Barton, Couldn't be chipset either ( normally 1.6v )

Don't think there are any 1.35 v on current boards/CPU's

well, i'd pull my heatsink off my 2400 and take a look, but i just dont care enough. so i'll take your word for it

 

[bjc112]

Originally posted by: bobcpg

Originally posted by: bjc112
Epox Manual

yep, notice the first note in the NOTES: section

dimm 2 and 3 are shared memory channel and they are grouped together, while dimm1 is dedicated for the 2 channel and is distant from the other 2.

bob

Thanks for clearing that up...

And thanks for the heads up all...










Now continue telling me you love the pics..

 

[bobcpg]

i love your pics



edit: :heart:

 

[cheapgoose]

nice and clean but nothing special.

nice system though!

 

[bjc112]

Originally posted by: cheapgoose
nice and clean but nothing special.

nice system though!

Ya I figured that...

No coolermaster or anything..

Better than your run of the mill Gatewat/Dell however..

 

[Ryan]

Originally posted by: bjc112

Originally posted by: cheapgoose nice and clean but nothing special. nice system though!

Ya I figured that... No coolermaster or anything.. Better than your run of the mill Gatewat/Dell however..

Hey, I have a gatewy case!!! I got it when I use to work there - it's a great tool! The whole thing is tooless, and it uses industry standard parts. Honestly, it's one of the best built cases I've ever had the pleasure of working with Upgrading is a snap, and it's not bad looking either.

 

[bjc112]

Originally posted by: rbloedow

Originally posted by: bjc112

Originally posted by: cheapgoose nice and clean but nothing special. nice system though!

Ya I figured that... No coolermaster or anything.. Better than your run of the mill Gatewat/Dell however..

Hey, I have a gatewy case!!! I got it when I use to work there - it's a great tool! The whole thing is tooless, and it uses industry standard parts. Honestly, it's one of the best built cases I've ever had the pleasure of working with Upgrading is a snap, and it's not bad looking either.

Alright, alright... I take it back.

I do have to agree, Gateway and Dells snap cases are sweet..

 

[MDE]

Originally posted by: Walleye
i dont like your case.

edit:
i dont mean that in a bad way, it's just...

i dont like your case.

Other than the case, not a bad system. Nice overclock too! How's the noise with that Vantec HSF?

 

[Walleye]

Originally posted by: bjc112

Originally posted by: rbloedow

Originally posted by: bjc112

Originally posted by: cheapgoose nice and clean but nothing special. nice system though!

Ya I figured that... No coolermaster or anything.. Better than your run of the mill Gatewat/Dell however..

Hey, I have a gatewy case!!! I got it when I use to work there - it's a great tool! The whole thing is tooless, and it uses industry standard parts. Honestly, it's one of the best built cases I've ever had the pleasure of working with Upgrading is a snap, and it's not bad looking either.

Alright, alright... I take it back.

I do have to agree, Gateway and Dells snap cases are sweet..

i actually prefer working with my POS dynapower metis case than my dell 8250 case.

it just seems sturdier or something.

i dont like plastic covered cases...

oh well, still a great computer

 

[bjc112]

Originally posted by: MonkeyDriveExpress

Originally posted by: Walleye
i dont like your case.

edit:
i dont mean that in a bad way, it's just...

i dont like your case.

Other than the case, not a bad system. Nice overclock too! How's the noise with that Vantec HSF?

GREAT.

Awesome combo between performance/noise/price...

keeps me running a cool 49C when loaded..

 

[sillymofo]

How fast can this thing go from 0 to 60? What about fuel efficiency? I don't see freakin airbags anywhere, what a freaking rip off.

 

[CraigRT]

cool... you definitely need more things though.. like some others have said.. looks like stuff i've seen a million times before.

time to go liquid cooled!

 

[edro]

Ahhhh! YOu got the cool HSF! Doesn't that have the magnets on the fan blades?

 

[bjc112]

Originally posted by: CraigRT
cool... you definitely need more things though.. like some others have said.. looks like stuff i've seen a million times before.

time to go liquid cooled!

Well i'm up for suggestions... I just don't feel like blowing $300 on LN2 or water when i already have a damn good overclock on air..

I think a new case would probably be better...




Let me know if you think i should add/change anything..

 

[Budmantom]

Originally posted by: bjc112
56K beware, ( 400 K a piece )


Tell me what you think..

1700+@2.4ghz
Epox 8rda+
Radeon 9500 Pro
2x 512 Hyper X 3200..

Pic 1

Pic 2

Pic 3

Pic 4

Pic 5

Pic 6

Let me know what you think...


EDIT: Have not been running dual channel | ) Epox Manual..

I think your pics are too big, you should post at 1024x768.

 

[bjc112]

Originally posted by: Budmantom

Originally posted by: bjc112
56K beware, ( 400 K a piece )


Tell me what you think..

1700+@2.4ghz
Epox 8rda+
Radeon 9500 Pro
2x 512 Hyper X 3200..

Pic 1

Pic 2

Pic 3

Pic 4

Pic 5

Pic 6

Let me know what you think...


EDIT: Have not been running dual channel | ) Epox Manual..

I think your pics are too big, you should post at 1024x768.

I figured someone would chime in and say that... They were taken @ 1600x1200..

 

[Budmantom]

Originally posted by: bjc112

Originally posted by: Budmantom

Originally posted by: bjc112
56K beware, ( 400 K a piece )


Tell me what you think..

1700+@2.4ghz
Epox 8rda+
Radeon 9500 Pro
2x 512 Hyper X 3200..

Pic 1

Pic 2

Pic 3

Pic 4

Pic 5

Pic 6

Let me know what you think...


EDIT: Have not been running dual channel | ) Epox Manual..

I think your pics are too big, you should post at 1024x768.

I figured someone would chime in and say that... They were taken @ 1600x1200..

I have enough speed(t1) to download them but my work computer won't do 16x12.