computer nightmare

[Old Hippie]

everything under PCIE Spread Spectrum is missing completely.

I dunno what to tell ya. I thought maybe you were just not reading the options correctly, or just not scrolling down the bios page.

 

[Jzeidenb]

i figured it out. AI overclocking setting had to be changed from Auto to NOS, not manual

 

[Jzeidenb]

i was hoping someone could tell me what to set my DRAM timings to (see above), i dont know what number goes in what setting.

 

[JustaGeek]

CAS Latency (CL)............................5T
RAS To CAS Delay (tRCD)................5T
RAS Precharge (tRP)........................5T
RAS Active Time (tRAS)...................12T
Command Rate (CR)........................2T

All the rest on AUTO.

Hope this works!

 

[Jzeidenb]

hi, the last two: tRAS and CR are not in my list (see above) what do those equate with?

 

[JustaGeek]

Originally posted by: Jzeidenb
hi, the last two: tRAS and CR are not in my list (see above) what do those equate with?

CAS# Latency [5]
RAS# to CAS# Delay [5 DRAM Clocks]
RAS# Precharge [5 DRAM Clocks]
RAS# Activate to Precharge [9 DRAM Clocks] change to 12 DRAM Clocks)
TWR [Auto]
TRFC [Auto]
TWTR [Auto]
TRRD [Auto]
TRTP [Auto]

Copied your list - change 9 to 12 as shown above.

CR - (Command Rate) is probably already set to 2, especially if you can't see it.

 

[Captain Nate]

n/t