Clocking the Asus A7A. The missing dipswitch.

[Szyszkiewicz]

System spec:

T-bird 1.133 gHz 266 Mhz bus
256 Mb Mozel 133 Mhz memory
Asus A7A 266 Bus / AliMagic

I have read about modding the Asus A7M motherboard and suspect you might have to do the same with mine.
But when looking at the DSW places where I could place the Dipswitch, I saw that it weren't exactly the same. Then I read the Dipswitch list and saw "DSW 10 = off/CPU ratio disabled (dis) ; on/CPU ration enabled (en)."
I wondered if it could be enough to just connect these two to get the possiblity to change multiplier in Bios. But then I also saw that someone could to that with a newer revision of the board, maybe I'll just have to download the newest Bios?

 

[Jarmo]

Just solder dipswitch block to the motherboard and that is all you need for changing multiplier. That switch 5 enables those other dip's and won't give anything new to the bios.