- Sep 19, 2000
- 1,003
- 0
- 0
I'm hoping someone can point me in the right direction here.
I'm trying to set up my PIX 515E as an Easy VPN Server to use for a PIX 501 Client.
The client setup seems easy enough, I've found several docs on it, and they all come down to using the same <10 lines.
The problem I'm having is with the headunit. I have found lots of documentation that says it can be used for and Easy VPN server, but not explicity which portions you need to set up and which you don't. The problem is that every time I get into documentation that eludes to this, it just goes on to explain out to set up two peers, which isn't the same thing.
Does anyone know where to find some concise docs on teh Easy VPN Server setup??
I've established connectivity all the way through, built the vpngroup, made a crypto map, assigned access-lists (which I'm not sure if they are used with Easy VPN or not, but I did them anyway), set pre-shared keys, and explicitly allowed ipsec traffic.
I really feel like I'm just missing something small, but can't figure out what it is.
-----
Conversely, who has experience building these things, how many hours would it take you to right some short directions (line by line for a minumum setup, plus a couple of notes per line on reasoning, so I get the whole concept, not just copying it), and what is your billable rate?
I'm trying to set up my PIX 515E as an Easy VPN Server to use for a PIX 501 Client.
The client setup seems easy enough, I've found several docs on it, and they all come down to using the same <10 lines.
The problem I'm having is with the headunit. I have found lots of documentation that says it can be used for and Easy VPN server, but not explicity which portions you need to set up and which you don't. The problem is that every time I get into documentation that eludes to this, it just goes on to explain out to set up two peers, which isn't the same thing.
Does anyone know where to find some concise docs on teh Easy VPN Server setup??
I've established connectivity all the way through, built the vpngroup, made a crypto map, assigned access-lists (which I'm not sure if they are used with Easy VPN or not, but I did them anyway), set pre-shared keys, and explicitly allowed ipsec traffic.
I really feel like I'm just missing something small, but can't figure out what it is.
-----
Conversely, who has experience building these things, how many hours would it take you to right some short directions (line by line for a minumum setup, plus a couple of notes per line on reasoning, so I get the whole concept, not just copying it), and what is your billable rate?