Cant get my new NF7-S and 2600+ mobile totally stable@200fsb

[Soulkeeper]

woohoo ! good job

 

[DaNorthface]

maybe the L12 mod will help some too..

 

[jediphx]

just ran prime with cpu at 200x11.5 and it ran 9 hours straight without crashing and temp was constant 49C. Seems pretty stable huh?

 

[jediphx]

gonna run it at 200x12.5 now to see how long prime lasts

 

[Avalon]

If I remember correctly, while OCing my mobile I got similar system file corruptions errors. I think it just simply meant you were taking something in your system too far. In those cases, I would lower the clock speed or increase CPU voltage, and windows would boot up just fine. I'm thinking you may not have had to reinstall XP :\
Good to hear that you're all squared away and running nicely now

 

[ectx]

Originally posted by: jediphx
gonna run it at 200x12.5 now to see how long prime lasts

since your problem seems to be meory related, run blended, or custom test and force large fft tests. will uncover problems, if any, sooner.

 

[jediphx]

you know something wierd.

I ran it yesterday at 200x11 mem at 11-3-3-2.5 vcore 1.75v and prime lasted 9 hours before it crashed

ran it again same settings but uped vcore to 1.775 and prime only lasted 2 1/2 hours.

Shouldnt the stability get better with more juice? i see through MBM5 my vcore is swinging a little bit more than im comfortable so maybe my Allied 430W is the culprit to all these problems?

temps are fine BTW it never goes above 49C at full load