Can't Flash

[Randum]

Ok here goes no floppy, and I want to flash my bios on my graphics card
http://www.ocprices.com/index.php?rev_id=230&page=6&action=reviews

How do I do it? I have NERO and notice I can make a boot disc, but I am at a complete loss here.

please help, im a noob with this

 

[Keysplayr]

Originally posted by: Randum
Ok here goes no floppy, and I want to flash my bios on my graphics card
http://www.ocprices.com/index.php?rev_id=230&page=6&action=reviews

How do I do it? I have NERO and notice I can make a boot disc, but I am at a complete loss here.

please help, im a noob with this

I don't think its wise to try this with a CDrom. Why you ask? Well, you cannot write, only read from a cdrom. How are you going to save your cards original bios if something goes wrong?

 

[fstime]

Please tell us WHY you want to flash your bios in the first place.

Is it somthing importent or is it just so you can screw around with the card.

I do not suggest upping the voltage or flashing to another manufacturers bios.

 

[Randum]

follow the link, so i can unlock the remaining pipelines

 

[Keysplayr]

Get yourself a floppy drive.

 

[fstime]

Originally posted by: Randum
follow the link, so i can unlock the remaining pipelines

Here you go.

http://www.ocforums.com/showthread.php?t=312063

I also suggest you get a floppy.

 

[Randum]

when my floppy is plugged in, it will not recognize...really odd, i know its getting power cause if i turn the cable upsidedown, its getting to it. In the bios i set the legacy boot to floppy, but why cant I see it? any suggestions?

p4p800-e deluxe board

 

[rise]

did you check device manager?

edit- i missed the part about the boot from floppy. still not a bad idea to see if it is recognized in device manager.

 

[Randum]

it appears to be there, but wont do anything. I know ive used one before on this board