Can someone verify this logic to me?

E equals MC2

Banned
Apr 16, 2006
2,676
1
0
Sorry, I posted this in Networking and no one goes there so here I am... please help:

1. ISP is in full working order
2. Router A works fine at full signal
3. I can also connect neighbor's connection perfectly without problems
4. But when I hook up Router B, it says it connects perfectly at full signal but the actual connection isn't there (Browser doesn't work, AIM, etc...)
5. HOWEVER I can access Router B's admin page without problems.

What's going on? Router B is Airlink101-AR410W. If I switch immediately to other wifi, they work fine.

Thanks for your help!
 

vi edit

Elite Member
Super Moderator
Oct 28, 1999
62,484
8,345
126
Sounds to me like the ISP doesn't have "Router B's" MAC address registered and isn't allowing it ISP access. Is it a cable provider?

If you can get into the routers setup page, you can usually test the connection. Can you pull up a webpage/ping a site from within the router?
 

Aikouka

Lifer
Nov 27, 2001
30,383
912
126
It sounds like you're connecting over Wi-Fi on both routers... do the normal RJ45 connections work properly on Router B.

EDIT:

Originally posted by: vi_edit
Sounds to me like the ISP doesn't have "Router B's" MAC address registered and isn't allowing it ISP access. Is it a cable provider?

If you can get into the routers setup page, you can usually test the connection. Can you pull up a webpage/ping a site from within the router?


Good advice as well, if this is the case, you could try spoofing Router A's MAC address. But be aware to check if Router A is spoofing another address. Sometimes routers are set to spoof the main computer's MAC address, because I've seen plenty of ISPs set up Internet service with just one PC and not with a router.
 

TallBill

Lifer
Apr 29, 2001
46,017
62
91
Wrong forum. Tech support or networking would be the obvious better choices to post this.
 

Aikouka

Lifer
Nov 27, 2001
30,383
912
126
Originally posted by: TallBill
Wrong forum. Tech support or networking would be the obvious better choices to post this.

*points at...*

Originally posted by: E equals MC2
Sorry, I posted this in Networking and no one goes there so here I am... please help:
 

DaWhim

Lifer
Feb 3, 2003
12,985
1
81
having access to router b just mean you can get on the network of router b. a router doesn't mean internet access
 

E equals MC2

Banned
Apr 16, 2006
2,676
1
0
Originally posted by: DaWhim
having access to router b just mean you can get on the network of router b. a router doesn't mean internet access

Both Router A & B are mine and A connects to ISP perfectly... so I assume problem lies somewhere between B itself or B with ISP together.
 

goatjc

Senior member
Oct 25, 2006
274
0
0
Originally posted by: DaWhim
having access to router b just mean you can get on the network of router b. a router doesn't mean internet access

Need more info on your setup. Does your ISP just take the MAC from your modem? Do they take the MAC from your actual computer? Router?
 

EKKC

Diamond Member
May 31, 2005
5,895
0
0
stop stealing neighbor wireless to test. be a man, if you're going to steal, steal it completely and cancel your own ISP

j/k

i agree with fobot. sell router B. but not before resetting all the settings and try it again without touching any of the settings (except the setting to connect to your ISP, of course)
 

Phoenix86

Lifer
May 21, 2003
14,644
10
81
Reset router B to factory settings, there could be any one of a dozen settings that are incorrect.