Here's out setup:
1 Cisco 4500 switch connected to a 3-interface Pix 515E firewall, which then connects to a Cisco 3600 router going to ISP.
On one of the interfaces of the Pix is our DMZ network.
4500 --- 515E --- 3600 --- ISP
We're going to implement VoIP so I will set up some VLANs on 4500.
I know how to do inter-VLAN routing on the 4500, but now my issue is how do I configure the link between the Pix and the 4500 switch so that the hosts on the 4500 can get to the DMZ network and Internet??
Should I set up a port as a routed port on the 4500, and then define a default route to the Pix?
Or will I have to rely on the Pix?
Cisco's website
indicates Pix version 6.3 and higher support VLAN, but it doesn't really give you much detail and I'm not sure how to approach the task at hand.
If anyone has any idea or suggestion, please let me know.
Thanks!
1 Cisco 4500 switch connected to a 3-interface Pix 515E firewall, which then connects to a Cisco 3600 router going to ISP.
On one of the interfaces of the Pix is our DMZ network.
4500 --- 515E --- 3600 --- ISP
We're going to implement VoIP so I will set up some VLANs on 4500.
I know how to do inter-VLAN routing on the 4500, but now my issue is how do I configure the link between the Pix and the 4500 switch so that the hosts on the 4500 can get to the DMZ network and Internet??
Should I set up a port as a routed port on the 4500, and then define a default route to the Pix?
Or will I have to rely on the Pix?
Cisco's website
indicates Pix version 6.3 and higher support VLAN, but it doesn't really give you much detail and I'm not sure how to approach the task at hand.
If anyone has any idea or suggestion, please let me know.
Thanks!