Can comeone recommend a good tower atx case?

Toggle sidebar Toggle sidebar
J

jyates

Diamond Member
Aug 18, 2001
3,847
0
76
Hi all,

Can anyone recommend me a good P4 case with at least 2 2.0 USB ports?

I prefer a beige color and for it to be at least 20" tall.

Would like for it to be an open format inside and not a bunch of cross braces
in side to restrict my working on the inside.

400 watt power supply that supports Intel P4 would be fine.

Plain old steel would be fine. Needs to support at least 2 IDE
hard drives and a couple of cdrom drives and a floppy drive.

I've bought a few cases from Newegg in the past but they shipped
them in the original cardboard boxes and half the time there is a
dinged corner or worse damage during shipment.

Thanks for your help.

Jim
 
Z

Zepper

Elite Member
May 1, 2001
18,998
0
0
20" tall is almost a full-tower these days - hard to find a mid-tower over 18" these days. Why not make or buy a little riser for it (e.g. a piece or two of 2x12 wood)? IAC, I would recommend the Evercase 42x2 series of cases. You can locate several on newegg that are about 20" (some of the dims are depth at 20, NOT HEIGHT, so be careful) high by selecting Color = Beige and entering 20 in the Keywords field of the case configurator form. And they also have some full towers at around 24 high. You can get the same cases from directron and get them double-boxed if you want.
. The CompUSA offer linked below is a good deal if you don't mind the door, that it's not BEIGE and the rebate hassle...

.bh.

 
You must log in or register to reply here.

TRENDING THREADS

COMPANY
RESOURCES
FOLLOW
Top Bottom