• We’re currently investigating an issue related to the forum theme and styling that is impacting page layout and visual formatting. The problem has been identified, and we are actively working on a resolution. There is no impact to user data or functionality, this is strictly a front-end display issue. We’ll post an update once the fix has been deployed. Thanks for your patience while we get this sorted.

Calling all E6300 and E6400 owners

P

Pugnate

Senior member
Anyone who has a E6300 or a E6400, kindly post the following, and only the following:

1. Processor and Stock Speed
2. Current Speed and Temp.
3. Time that it has run overclocked
4. Any issues?
5. If you are using a custom HSF, then please post your overclocked speed with the stock cooler as well.


I will start:

1. E6400 (2.14)
2. 2.86 running game stable at 40 degrees.
3. Five months without issues.
4. Absolutely no issues and overclocking was easy.
 
1. E6300 1.86Ghz
2. 1.86Ghz 33C idle, 43C full load
3. Has never been overclocked
4. No issues
5. Modified Big Typhoon cooler, never used the stock cooler

 
1. E6400 (2.14)
2. 3.4 ... I don't monitor temps ..
3. Since early Dec..
4. No issues here..



As shown in my sig, ( need to revise ) Ran 3.6 at 1.45v, but 3.4 is with default vcore, so I prefer to leave it there..
 
1. E6300
2. 3.19 GHz @ 33 idle / 51 Orthos
3. About a month
4. None
5. AC Freezer 7 Pro

Originally posted by: blackangst1
Stock HSF 36 idle 43 at full Orthos load
Click to expand...
Kinda hard to believe.
 
1. E6400
2. 3.8 ghz @ 41C idle/ 63C load
3. Around two months
4. P5B Deluxe died on me :/ I have to wait around for the RMA.
5. Scythe Infinity mounted with screws.
 
Originally posted by: Pugnate
Anyone who has a E6300 or a E6400, kindly post the following, and only the following:

1. Processor and Stock Speed
2. Current Speed and Temp.
3. Time that it has run overclocked
4. Any issues?
5. If you are using a custom HSF, then please post your overclocked speed with the stock cooler as well.


I will start:

1. E6400 (2.14)
2. 2.86 running game stable at 40 degrees.
3. Five months without issues.
4. Absolutely no issues and overclocking was easy.
Click to expand...

1. E6300
2. 2.8 stable at stock voltage at 50C
3. Two days 😛
4. drr-800 and a low multiplier are holding me back.
 
1. e6400 2.13
2. 3.2 42c/50c TAT with fan at 7v - Asus SilentSquare ghetto rigged with 100mm Scythe Kaze-Jyu
3. 4 months
4. On a bad overclock, have to re-install X-Fi drivers (DS3 issue)

-z
 
1. E6400, 2.13GHz
2. 3.2 GHz, 23C/42C, Chip undervolted to 1.275V
3. 1 month
4. None that i didn't cause by tinkering
5. Arctic Cooling Freezer 7 Pro
 
Originally posted by: gerwen
1. E6400, 2.13GHz
2. 3.2 GHz, 23C/42C, Chip undervolted to 1.275V
3. 1 month
4. None that i didn't cause by tinkering
5. Arctic Cooling Freezer 7 Pro
Click to expand...
Where are you getting your temperatures from?
 
E6300 (1.86ghz)
3.15ghz, no change to voltage on anything
2 days, ran stress test and farcry and seems fine
Seems to run hot under load, approaching 70c, but no visible issues
Stock HSF

I ran 2.5ghz with no problems right out of the box. After capping the pci-e slot at 100mhz, I could push it above 3ghz. My memory can do at least 450/900, doesn't like 500/1000.


 
Xeon 3040 (E6300) 1.86
2.9 Ghz 40/65
1 hour
Random restarts, cool boot issues, even at stock speeds --> PSU problem 😉
Stock HSF
 
E6400, 2133
3200, 40 idle, 50 Orthos (Vcore 1.350)
2 months
As posted in another thread started giving me problems 2 days ago. Updated BIOS to 1004 and am now more solid than I was.
Big Typhoon, never used the stock cooler
 
E6300 - Gigabyte DS3
2.8 GHz = 400 x 7
MCHV=+0.1
VCORE=normal @ 1.2875 (can go to 1.23 or more and still stay orthos stable!)

Orthos stable 12 + Hrs @ 1.25 V
 
1. E6400, 2.13GHz, Gigabyte GA965P-DS3
2. 3.2GHz(4x800MHz) @ 1.4875v, northbridge +0.2v
3. almost 3 months
4. no issues
5. I have an OEM version, so no stock HSF. I am using Asus Silent SQUARE. At idle: 25'C, after 30 minutes running 2 Prime95 CPU torture threads: 44'C
 
OK, I'll play. 🙂

1. E6400
2. 3.2GHz at 40C in my crowded case with high ambient temp. 😛 Gets to upper 50's under heavy load.
3. A month or so? 24/7. 😀
4. My only issue is a LAN driver that occasionally stops working with my DS3. Sometimes it will work for a week and other times I must reboot daily. Tried several different drivers and am hoping I have that fixed now.
5. I have an AC Freezer 7 Pro but when I got my DS3 board I never bothered to play with the stock heatsink/fan.

P.S. Just to show it's stable. Text

P.P.S. I've had the RAM set at 4-4-4-12 for the last week with no problems. 🙂
 
1. E6300
2. 3.0Ghz at 47 idle, 60 on load with 1.33 vcore and a stock cooler with stock hsf.
3. 2 1/2 months, orthos 12 hours stable.. ( my memory is what restricting me to go higher)
4. sometimes while booting up it stops at "DMI pool verifying data" or something like that. i have no idea why? (it requires a restart after this)
5. never had an after market or customized cooler 🙁
 
Originally posted by: StopSign
Originally posted by: gerwen
1. E6400, 2.13GHz
2. 3.2 GHz, 23C/42C, Chip undervolted to 1.275V
3. 1 month
4. None that i didn't cause by tinkering
5. Arctic Cooling Freezer 7 Pro
Click to expand...
Where are you getting your temperatures from?
Click to expand...

Both Coretemp and TaT agree to within a couple degrees.
Screenshot

I had nice temps, around 50C load before i started undervolting. It just got better from there.
 
E6300 @ 1.86Ghz
Running at 2.96Ghz for ~2 weeks
CPU @ 1.1-1.25V (stock)
No idea about temps
Arctic Cooling Freezer 7 Pro

I play BF2142/Oblivion/FEAR/BF2 all stable
 
Originally posted by: Rio Rebel
E6300 (1.86ghz)
3.15ghz, no change to voltage on anything
2 days, ran stress test and farcry and seems fine
Seems to run hot under load, approaching 70c, but no visible issues
Stock HSF

I ran 2.5ghz with no problems right out of the box. After capping the pci-e slot at 100mhz, I could push it above 3ghz. My memory can do at least 450/900, doesn't like 500/1000.
Click to expand...

Okay, fixed my temperature problems. Got a CoolerMaster HyperTX, and I can't make it go above 52C no matter the load. Good times!

Now at 3.2ghz, no voltage increases. I think this is where she'll stay. I can't see the point in upping voltage just to increase another 100-200 mhz.
 
OK< I have 6 C2D's, so I will post the averages

3 x 6300, 2 x 6400 1 x 4300
3.4 ghz x 4
2.5 x 1 (e6400 crappy mobo, doing GPU F@H)
1900 E4300 crappy mobo (soon to be a DS3)
3-5 months
Ninja syth, syth infinity, 2 x Big typhoon, two stock hsf
Temps are all 50-60c depending on abient
No issues.
 
You must log in or register to reply here.

TRENDING THREADS

Back
Top