Broke computer?

[aniki]

My new system after operating for 2 weeks suddenly won't boot pass the first screen.
This problem occured after I had install NIC and developed an IRQ conflict. After having the conflict I proceeded to switch the Soundcard and NIC around a few times and then the machine wouldn't boot up at all. I have removed everything but the Agp Card and the system still wont boot pass the screen which displays the cpu speed. I have even changed the memory stick. Nothing!!!

Here are my specs:
Asus cusl2
P3 700@933 w/ golden orb 1.65 v
IBM gxp 75 30 gb
128 mushkin pc 133
Pioneer Dvd 16x
sblive value
Herceles 3d Prophet 2(618)
Linksys 10/100

System had been very stable even after running 3dmark looped for several hours.
Also, Every time I try to boot up its like it freezes before the memory test and displays my cpu speed as 466mhz. Whats broke? Is there any hope?

 

[aniki]

Ive narrowed it down to the cpu or motherboard

 

[ltk007]

try resetting the cmos. There should be a jumper on the motherboard for that, just change the jumper, hit power and put it back. If you don't know which jumper to change then just remove the battery for 5-10 mins.

 

[ltk007]

Grrr, I only pressed it once I tell you, ONCE!

 

[aniki]

I tried resetting the cmos and still won't boot up. What seems broken to you?

 

[Ornery]

I know! I know! <hand waving wildly in the air>

Back off the overclock. I read that mobo has issues with that CPU being OC'ed.

New CUSL2 beta BIOS 16 AndyHui Sep/02/2000 8:40 PM
http://forums.anandtech.com/messageview.cfm?catid=27&amp;threadid=224733

 

[aniki]

Thanks guys for the info.....Question! if the board has an issue with overclocking and it cant boot up due to this possible issue, What can I do to get this board back up and running

 

[aniki]

Anyone?.....Anyone?......