Brick wall in oc/ stability

[MiranoPoncho]

Rig in sig, I must find bottleneck. is it impropper voltages?
cpu-1.47(260 fsb)
ram-2.7 3:4 divider @ 217mhz 2.5-3-3-6
agp-1.65 450 core 1200 memory
all on air

 

[milkrocks]

I would up the CPU voltage to 1.55V and see how much more you can get.

 

[MiranoPoncho]

I tried, I'm thinking its my psu. 265 max on a week 42 winchester.

 

[miketheidiot]

Originally posted by: MiranoPoncho
Rig in sig, I must find bottleneck. is it impropper voltages?
cpu-1.47(260 fsb)
ram-2.7 3:4 divider @ 217mhz 2.5-3-3-6
agp-1.65 450 core 1200 memory
all on air

ha i got stuck at the exact same place. I can do 2.55 stable at stock volts all week but i can't get 2.57 stable with any voltage.

 

[bdoople]

I've read and read about overclocking, but I still don't understand how you can make your FSB and RAM run at different speeds. I got mine runnin at 215mhz and the CPU is 215x10. I wanna go higher, but I just don't get the concept and don't want to fvck up my RAM. Any help would be appreciated. (Not to threadjack, so I apologize if I did.)

 

[MiranoPoncho]

It's called running a divider. ie the ratio of fsb to ram mhz. You are running what is known as 1:1, The option is in the cell menu, under ram options or timings or memory at the very top. then at the top of the next menu, should be something looks like:
()AUTO or this setting.
()100 thats 2:1
()133
()166
()200 You either have this set to this one

Hope this helps. anywho, anyone here think a beefier psu would help the ocing at all?
3.3v=3.20
+5v=4.89
+12v=11.54

 

[Vegitto]

The voltages are okay, but how many amps do you have on the +12V rail?

 

[MiranoPoncho]

The voltages are as follows:

+5v 35a
+12v 15a
+3.3 28a

 

[LyNX31]

Originally posted by: MiranoPoncho
The voltages are as follows:

+5v 35a
+12v 15a
+3.3 28a

mirano how do i go about finding my amps on the 12v rail? ur lucky u even got that far! i couldnt get passed 2.45

 

[GuitarDaddy]

Youre probably at the max for that chip, my week 48 winnie maxed at 2.6 regardless of voltage or settings.

 

[MiranoPoncho]

The information you seek is on the side of your Psu. Should be in a table of some kind on the side facing the you.(90 degrees from the rear). ah week 41 or 40 something. perhaps I should up my psu and get a venice or cheapiex2 when they come out?