• We’re currently investigating an issue related to the forum theme and styling that is impacting page layout and visual formatting. The problem has been identified, and we are actively working on a resolution. There is no impact to user data or functionality, this is strictly a front-end display issue. We’ll post an update once the fix has been deployed. Thanks for your patience while we get this sorted.

"breaking in" a new cpu before overclocking

Page 2 - Seeking answers? Join the AnandTech community: where nearly half-a-million members share solutions and discuss the latest tech.
I'll boot stock, install the OS and drivers, etc. Once I'm sitting at what I consider a "fresh" install, I reboot and start OCing it.
 
i never keep a cpu at stock speed for more than 10min or so (enough time to mess with the bios settings a few times)
i break them in at higher speeds 🙂
 
With silly-cone/metallic combinations of components, the rule that I always understood was:

"Infant Mortality: If it's gonna fail, it will fail in the first 72 hours."

So with building a new system, I'd at least run it 72 hours -- before or after Windows install -- at stock settings. Or you could test your memory for a day's time with MEMTEST86+, then install the OS and run at stock settings for a few more days.

But this just addresses hardware failure so that if such occurs, you can get your RMA# and resolve it post-haste.

On the OC angle, you could be pushing your luck unless you research voltage and heat tolerances of the manufacturers for CPU, RAM and motherboard. But if their QC is worth anything, the upper ranges within tolerance or at tolerance should be safe.
 
You must log in or register to reply here.

TRENDING THREADS

Back
Top