Bios setting question

[ingeborgdot]

In the bios setting for halt on what is it best to set it at?
No errors, all errors, all, but keyboard, all, but diskette, or all but disk/key? Thanks.

 

[meltdown75]

use the default setting. not sure what it is but i don't think it really matters. default that biyatch!

 

[ingeborgdot]

Another question about integrated peripherals. Do I want usb keyboard and mouse support enabled or disabled? What would this do? I have a usb keyboard. And what about onboard serial ports. Should you go auto or what they have as default. Same question with parallel port and midi port address, irq, and cir port. Just curious if I should go with default?

 

[RadiclDreamer]

.

 

[jackschmittusa]

I usually set "halt on all errors except kb". If you have a printer on the parallel port, set it to ECP, if not leave at standard. Default choices for midi port are usually fine.

 

[ingeborgdot]

Ok,one more long question about integrated peripherals. I am using a seagate barracuda 7200.7 st380011a ultra ata/100. If you really know please help. IDE channel 0 Master Raid - should I enable or disable? IDE channel 0 slave raid- enable or dis?
Ide channel 1 master raid- en or dis? Ide channel 1 slave raid- en or dis? Sata primary master raid- en or dis? Sata secondary master raid-en or dis? Serial-ata 2 (internal PHY) - en or dis? Onboard serial ata- en or dis? Serial ata function- en or dis? Onboard giag-raid- en or dis? I hope you can understand what I am talking about. Thanks for your time and help.

 

[ingeborgdot]

Is this too much to ask? Thanks for helping.