• We’re currently investigating an issue related to the forum theme and styling that is impacting page layout and visual formatting. The problem has been identified, and we are actively working on a resolution. There is no impact to user data or functionality, this is strictly a front-end display issue. We’ll post an update once the fix has been deployed. Thanks for your patience while we get this sorted.

BIOS recovery problem

trojans

Junior Member
Hi,
I'm using a E6400 on P5W, I tried to clear the CMOS before installing a new bios file
by issuing a hard restart during flash. The problem is although I have saved
the new bios file in my usb drive, and I also have the product CD, when the system
reboot, it found the file in usb drive, but only gave a few beepings, then keep searching
for CD-ROM, and then said it couldn't find a CD-ROM !
Now I am screwed, couldn't even boot my system.
Someone please help me.

thanks tons.
 

clear the cmos. flick your psu switch off. find your lcd battery on your motherboard and near there is a 2 pin jumper over 3 pins move the jumper to the other position for 5 secs them move it back then turn the pc back on you now have factory settings again.

when im overclocking and i go too high voltage and no post i just flick the psu switch 3 secs then flick it back and turn on at front and it recovers back with your settings still the same so you need to reduce to have some success.
 
Did you ever have any luck? Just a few ago my p5b d died after making changes in the bios. Have jumped the cmos several times but no sign of life. My only other alternative is to take the battery out, but I don't know if that would do any more than just shifting the jumper.
 
Asus boards have a built in bios recovery system. Just unplug your PSU for 30 seconds and plug it back in. Unless you have totally cooked your bios, it will reset to factory defaults and boot.
 
Billb2, I had done that before with no luck, but it worked today, just a few minutes ago! IT'S ALIVE!!! 😀

btw, holding the insert key while booting is something done with AMD/ n force boards; the p5b manual never mentioned this trick.
 
Back
Top