bios not recognizing the mobile barton 2400+?

[chinkee]

i finally put all the pieces of my comp together for the first time and everything seems to be working great. however, when everything initializes, the chip is labeled as an "unknown processor" and the bios defaults the settings to 100 x 6 MHZ. I use an NF7-S v2, so anyone w/ a similar setup who could help me out w/ the settings would be appreciated.

 

[myocardia]

Your chip is always going to be labeled as an unknown processor. You're running a mobile chip in a desktop motherboard. Just raise the vcore to 1.75v, set it to 11.5x200, and leave it alone.

 

[magratton]

Chinkee, I have the same mobo as you and had the same thing. Everything is fine.