Barton 2500+ steppings - whats your and how well does it overclock ?

[phpdog]

Hi ,

Im going to buy a Barton 2500+ and i was wondering what steppings are best and what to watch out or ask for .

Could anyone with a 2500+ please tell me there stepping and how we'll it overclocks please .. thanks to anyone who replys ... :brokenheart::camera:

 

[phpdog]

AMD ATHLON XP 2500+ 333FSB SKT-A OEM BARTON AXDA2500DKV4D AQXEA
current stock codes are >>> 0332TPMW

is this a good stepping ... anyone ?

 

[slag]

Its what I have..

Running 2.3 ghz on Air and 1.825 volts. Using an AX-7 heatsink with a tornado fan that really really needs to be regulated a little slower.

Max Temp after running prime95 all night was 46 degrees. Idle temp was 41. In a hot room I'd probably hit low fitties at 100%

This is on an Aopen ak79g-400vn board

 

[jar5tyle]

I'm not even sure how to check the stepping, where did you view yours from? What programs? I have Sandra Standard and under CPU/BIOS info, stepping/revision says: A / 0 (0)

Stepping Mask: ?

lol but anyway, I'm running at 2.313 (11x210) @ 1.8v

On air

 

[phpdog]

your stepping is on the CPU itself ... look at the chip ... theres a little black rectangle sticker with writing on it just below the core (centre) of the CPU .... bye

 

[phpdog]

heres another stepping i see that i could buy it only gives you this AXDA2500BOX ?

 

[tweaker54321]

i have a AQXEA 0330VPMW "Y"

2.4ghz (10.5x230) at 1.8v

 

[Corporate Thug]

AQXEA week 26 2.2 on 1.74V

 

[Peter D]

AQXEA Week 24 - Overclock - Unknown for now

 

[savx]

Originally posted by: Drozdov
i have a AQXEA 0330VPMW "Y"

2.4ghz (10.5x230) at 1.8v

Do you have any idea about the absolute performance numbers of ur 2500 barton (Sandra CPU benchies?)

 

[AkumaX]

i dunno what my stepping is, my 2500+ @ 2300mhz (uamd shows 3700+) hasnt hiccupped for weeks

 

[Huntress]

AQXEA 0327 @ 2.4ghz on my NF7-S r2.0 @ 1.65v (actual volts... 1.675 in BIOS as this board under volts)
Running 100% on Seventeen or Bust @ 38.50C

This is a new chip I got recently... still working it in... this is week 1 for this chip. Tomorrow will be it's 1 week b-day

 

[jiffylube1024]

I forget my stepping, but I'm pretty sure it's date is 0330. It runs 2.2 Ghz (200 FSB) @ stock (1.65V) and 2.0Ghz @ 1.57V (heavily undervolted).

 

[dannybin1742]

aqxda 0315 2400mhz 1.75V (shows 1.71 in mbm) using an slk900U with a slow 92mm fan

 

[Slash621]

if i got a barton 2500 in the last month from newegg would it be an AQXEA or whatever is the good one?

 

[high]

I have a DFI NF2 Ultra and 2500+ AQXEA and I can run 230FSB on stock voltage but my 2100 RAM holds me back, so I leave it at 11x200. The DFI is a bada$$ oc'er with an aqxea

 

[Noid]

AQXEA 0330 VPMW

in sig...

215.5 x 10.5 = 2265 at 1.8v (actual)

not the best 2500 overclocker ,,, but a sweet snappy chip

 

[Temujin2k2]

It should be good. Mine is 0330RPMW. Does 11x200@stock or 12x186 @ stock or 11.5x200@1.75v (MBM shows 1.648v).

 

[Slash621]

is there anyway to tell if i have an AQXEA without removing my heatsink? i dont wanna have to reapply paste...

 

[Noid]

Originally posted by: Slash621
is there anyway to tell if i have an AQXEA without removing my heatsink? i dont wanna have to reapply paste...

no

 

[Slash621]

crap.. is the performance difference knoticeable? what changes are made on the AQ's that arent on the AD's

Also my chip i got from newegg like 3 weeks or less ago.... so i'm guesing its an AQ since its a later model or somethin

 

[Jeff7181]

Week 24... 2.2 Ghz on default voltage, or 2.3 on 1.725 volts. It will also handle a 233 Mhz FSB, but my RAM can't run at that speed, so I keep it at 200.

 

[pelikan]

AQXEA 0331 TPMW 9 - 2400MHz, 1.9V

 

[dannybin1742]

aqxda 0315 2400mhz 1.75V slk900U, with low speed 92mm fan
12X200

 

[Blooz1]

AQXEA 0334 SPMV, 2.2Ghz@ 1.62V (11x200) SLK-800a/Panaflo 80MM H1A

I've only had this chip a couple of weeks, haven't really messed with it much!