AXIA Overclocking

[tomrizzo]

I know that when they came out, they were hot. I mean in how much you could overclock them. I was gonna get one from my friend. So I was wondering if anyone could give me some ideas, about how far I can push it. It is a 1 Ghz piece, thanks guys.

 

[tomrizzo]

bump

 

[pillage2001]

You'll get in between 1.3ghz to 1.4Ghz. If you're lucky, maybe 1.5Ghz with water cooling. 🙂

 

[rogue1979]

I have had three, they all hit 1400MHz with air-cooling and 1.85v, one of them hit 1475MHz with 2.0v.

 

[tomrizzo]

How did you pull off 2.0v, what mobo were you using.

 

[rogue1979]

Epox 8K7A, although there are quite a few voltage mods out there for a lot of motherboards to increase the max vcore from 1.85v to 2.0+. Actually mine will reach 2.25v without any mods, that is the main reason I bought it. But I have an air cooled solution, so 2.0v is about the max I want to run.

 

[Confused]

AXIA 1000 @ 1467 @ 1.85V, air cooled 😀

I think this may hit 1.5GHz when i get the chance to flash the bios on my ECS K7S5A to the overclockers bios and select 150FSB. Currently running 10x146.7 🙂

Cooling is a FOP32 heatsink and 92mm quiet Adda fan 🙂

Will report back when/if i can get the FSB up any more 🙂

ConfusedBW

 

[todays]

I have an AXIA 1000 running at 1400 at 1.66v - It will run at 1.53 at 1.75v
Motherboard Shuttle AK31A latest bios 3-8-02
Heatsink Alpha PAL 8045 with 40cfm fan
Idle temp 39c
full load temp 45c

 

[DivideBYZero]

I have an AXIA 'Y' 1Ghz part currently running at 1518Mhz with CAK II 38 Air Cooling @ 1.85v.

PLUS this puppy goes higher and harder, watch this space for 1.6Ghz with Air!!

😀Have I got the Hardest air cooled AXIA 'Y'?😀

Check my scores, etc:

 

[Confused]

Oh yeah, forgot to mention i've got an AXIA "K" rather than a "Y", so i think my current 1467MHz is quite good!

Still not got that working floppy drive so i can flash to overclockers BIOS....soon, soon!

ConfusedBW