ATTN All A64 Owners

[Zebo]

3000 Winchester @ 2.65Ghz
Idle u/k Load u/k
water block
AS 5

 

[Paratus]

Ah imitation is the sincerest form a flattery.

😉

 

[dguy6789]

AMD Athlon 64 2800+ Newcastle
1.8Ghz
Stock Cooling
Idle 30C, Full Load 34C
1.2Volts
MX-1 Thermal Paste

 

[JBT]

CPU (speed) 245 x 10 = 2450 MHz On Epox 8KDA3J @ 1.65 vCore
Temps - 35C/52C
HSF Zalman CU 7000B
AS 5

 

[PascalT]

I see some people getting 30-34C idle temps on a Winnie 3000+ with stock cooling. Yet I get 36-39C on mine, using AS5. At stock speed I get that, OCed to 2250mhz I get about 40C.

What am I doing wrong? Could it be bad case temps affecting the CPU? It's a standard ATX case with no extra fans. see sig for specs.

 

[Icepick]

CPU - 3500+ at 2.6GHz (10x260), Vcore = 1.54V
Temps - 39C, 53C
HSF - Thermalright XP-90 + Vantec Stealth
thermal grease - Stuff that came with Thermalright

 

[orangat]

CPU- Winchester 3000+
Temps - 40C, 65C (Load temp is wrong and is probably 10C lower)
HSF - Zalman 7000B
Grease - AS5

 

[Plasmah7]

CPU: winchester 3000+ 939
speed: 2430 (9x270)@1.424v
temps: idle = 40C load = 51C
hsf: stock
thermal grease: stock

 

[DVad3r]

31-32, no clue how to check load.

 

[kb3edk]

Originally posted by: DVad3r
31-32, no clue how to check load.

To check load temps just run something that pegs your CPU constantly at 100%... a popular choice is a distributed computing project like Folding@Home, FindADrug, etc. You could also try a "burn-in" program like Prime95. Just run either of these programs for 10 minutes or so and see how much your temps rise.

My specs:

CPU: FX-51 @ 2.4 GHz, 1.6 vcore
Temps: 45 idle, 53 load
HSF: Waterblock
Thermal grease: generic

I'm currently debating whether to switch to AS5... I saw Antec "Formula5" at the store, I've heard it's just as good...

 

[mrwizer]

CPU: 3000+ 90nm @2.2GHz
HSF: Stock w/stock grease
Temp: 53 load

 

[MDE]

Winchester 3000+ @ 2.5GHz (1.45V)
Zalman CNPS 7000A w\ Arctic Alumina
41C load, no idea about idle (runs Folding@Home 24\7)

 

[driphter1]

Winchest 3000+ @ 2.2 (245x9) 1.46v
thermalright xp-90 w/ artic silver 5
38°C / 50°C

 

[SrGuapo]

CPU - 3200+ at 2.4GHz (10x240), Vcore = 1.5V
Temps - 43C, 55C
HSF - stock
Thermal grease - Arctic Silver 5

 

[mwmorph]

36C idle
not sure load(61* ithink)
2.4ghz(200.9x12)
amd 3300+ scocket 754
is this the stock cooler? if not what is it?
http://img176.exs.cx/img176/831/janurary1120051024tq.jpg

edit: the fan says taisol 12v ball bearing dc. it looks big cause my mb is uATX.

 

[caboob]

speed: 2600 (325x8)
temps: 28C idle, 34C load
HSF: EXOS watercooled
TIM: AS5

 

[PClark99]

CPU - 3200+ at 2.5GHz (10x250), Vcore = 1.5V
Temps - 40C, 50C
HSF - Swiftech MCX-64V
Thermal grease - Arctic Silver 5

 

[werd]

CPU = 3000+ at 2160MHz (270x8) Vcore = 1.4
Temps = Cold
HSF = Stock
Themal Grease = AS3

POS Week 50-51 core? Yep. STAY AWAY FROM THEM.

 

[Cha0s]

Originally posted by: werd
CPU = 3000+ at 2160MHz (270x8) Vcore = 1.4
Temps = Cold
HSF = Stock
Themal Grease = AS3

POS Week 50-51 core? Yep. STAY AWAY FROM THEM.

why did you use 8x multiplier, wont 10x give u more overclock?

 

[MGHawk]

CPU=3000@2592MHz (288X9) VCore=1.5
Temps=45/53
HSF=Thermaltake Silent Boost
Thermal=Arctic Silver 3

System: Epox 9NDA3J, A64 3000@2.6, 1GB Corsair VS, X800 Pro,

 

[nickymouse]

CPU-A64 3000 @ 2250(250x9)
MB-GA-K8NS-ULTRA 939
HSF-XP90
THERMAL-AS5
TEMPS-IDLE 28C LOAD 38C