++ ATOT official NEF thread part IV ++

Page 375 - Seeking answers? Join the AnandTech community: where nearly half-a-million members share solutions and discuss the latest tech.

Rubycon

Madame President
Aug 10, 2005
17,768
485
126
heat sensor in the shower?

It's about 1 meter outside of the door leading to the head. If that door is opened too fast the hot, moist air can raise the thermistor bead temperature too quickly setting off the heat delta alarm.

Sometimes the vents aren't changing enough air which can be a combination of things from wind speed, our heading/speed, or relief house fan speed/troubles. It seems the RH issues on deck 8 have moved up to deck 11 in the past month.

CO2 systems are not used in living quarters. The only active fire control is a high pressure low volume sprinkler head. It produces a fine mist not much different than a TDK Nebulizer.
 

alfa147x

Lifer
Jul 14, 2005
29,307
106
106
It's about 1 meter outside of the door leading to the head. If that door is opened too fast the hot, moist air can raise the thermistor bead temperature too quickly setting off the heat delta alarm.

Sometimes the vents aren't changing enough air which can be a combination of things from wind speed, our heading/speed, or relief house fan speed/troubles. It seems the RH issues on deck 8 have moved up to deck 11 in the past month.

CO2 systems are not used in living quarters. The only active fire control is a high pressure low volume sprinkler head. It produces a fine mist not much different than a TDK Nebulizer.


Ah. I hate how humid my bedroom gets after I shower. Actually it's not terrible it's bad when my gf showers. She takes much too hot showers.
 

alfa147x

Lifer
Jul 14, 2005
29,307
106
106
I'm considering getting a megahalem for my desktop. $30 I just need to know if it'll fit in my case
 

alfa147x

Lifer
Jul 14, 2005
29,307
106
106
The Antec P180/182/183 case are 8.1 inches wide. The 160mm tall tower style cpu heatsinks such as the Prolimatech Megahalem require cases that are at least 8 inches wide. The heatsink just barely fits.
 

IndyColtsFan

Lifer
Sep 22, 2007
33,655
688
126
The Antec P180/182/183 case are 8.1 inches wide. The 160mm tall tower style cpu heatsinks such as the Prolimatech Megahalem require cases that are at least 8 inches wide. The heatsink just barely fits.

Yeah, it won't fit because the board and standoffs would push it up more than .1 inches.