Athlon64 3500+ S939 0.9m

[siberain]

Hey guys,

How do i tell if my chip is .9m instead of .13m to be on the safe side.. i purchased a 3500+ .9m

but it doesnt state anywhere on the box whether is .13 or .9.. where would i see it on the chip or box..?

Is there a certain serial number i should look for? if so.. where?


Thanks.

 

[PhattyB]

.9 is Winchester Core
.13 is Newcastle Core

It should be on the box somewhere.

 

[Icepick]

Check out this thread for your answer.
http://forums.anandtech.com/me...3619&enterthread=y

 

[Icepick]

Better yet, here's a guide that tells you everything you ever wanted to know (and more) about the AMD processor model number and what each character means. This model number is printed on top of the chip and should be visible through the box without opening it.

http://www.overclockers.com/articles1116/index.asp

 

[siberain]

Thanks Guy,


I'll take a look at it at home and post a reply, but its abit late to look on the cpu since its all mounted and connected.. i'll look for the serial # on the box and let you guys know..



Thanks again!

 

[Icepick]

I didn't know you already installed it. All you have to do is install a freeware application called CPU-Z and run it. That will tell you whether it's 90 or 130nm. It also gives you info on your clockspeed and info on the memory you installed.

 

[Shimmishim]

guys! it's .09 not .9

🙂

 

[PhattyB]

Originally posted by: Shimmishim
guys! it's .09 not .9

🙂

Actually, if you want to get really specific, it's .09µm a.k.a. 90 nanometer. Regardless, we knew what he was talking about.