athlon xp barton 2500+ and abit nf7-s mobo

[j8choi]

hi
i just bought these two items and when i boot up it boots at 1.1ghz. I go into the bios and it has a softmenu 3 setup. When i go in there it has a preset for the 2500+ processor in which the external clock is at 166mhz and the multiplier is at 11.0. It says the cpu internal multiplier is at 1100mhz (100 x 11.0) AGP frequency is at 66mhz. Anyone know how to make this processor run at the speed it should? helppp
it has an option where it says CPU Operating Speed: 2500+ and you can change that to user define and then be able to change the multiplier and clock speed. But its set at 2500+ so i dont know why you would have to change it. The clock is at 166 so i dunno whats goin on

 

[SilentAssassin]

yeah just change the clock speed yourself to 166. That is weird though how it set it low like that.

 

[j8choi]

 

[j8choi]

the odd thing is is that in the softmenu 3 setup it says the external clock is at 166mhz but up at the top it says cpu internal freq. 1100mhz (100 X 11).

 

[j8choi]

it has this auto setting for the 2500+ processor but for some reason its running at 100

 

[jiffylube1024]

So just change it yourself to 166.

 

[j8choi]

its at 166 but its running at 100

 

[rgreen83]

Just change the speed to "User defined" and set it to 11x166 (11x200 is fun too ) I have same combination and it did the same thing.

Whered you get your cpu?

 

[lordtyranus2]

Do you have the latest bios?